Flexo.Cloud

Electronic RFID Lock Flexo.RFID for Wood and Steel Furniture The Flexo.RFID (Radio Frequency Identification) sets a new standard. It has been developed for the leading RFID standards (MIFARE® Classic 1K and MIFARE® DESFire EV). With its three authorization levels (Master, Manager, and User), the locking system offers high flexibility in operation. Like all locks in the Flexo series, the RFID variant allows both recessed installation (Flush-Fit) and retrofitting (Retro-Fit). This allows an existing system to be conveniently and quickly upgraded or transformed into a modern stylish design with Flush-Fit. The innovative design lock - Made in Germany - enables the secure storage of personal items in offices, schools, and sports facilities. Installation and Operation The lock can be directly installed in our standardized mounting hole (Retro-Fit) 16x19mm. Alternatively, a 45x47mm mounting hole can be chosen, allowing the lock to be recessed and visually enhanced (Flush-Fit). Installation Video Flush-Fit More information can be found in the manual in the download section below this product description. The lock is secured with an M19 nut and can optionally be supplemented with anti-rotation protection (see suitable accessories). By presenting a transponder card or transponder chip, the lock is released. It is then opened or closed by a 90° turning motion. In doing so, the bolt mounted on the back moves to a locking angle, preventing the door from opening. If a user card is lost, the lock can be opened at any time with the Master or Manager card. Product Features External battery access and battery replacement without dismantling the locking system RFID Standard: MIFARE® Classic 1K/ MIFARE® DESFire EV Integrated occupancy detection with MIFARE® Classic 1K Easy retrofitting, e.g., to replace mechanical locker locks Adjustable bolt (in 90° increments) Minimal front build-up of only 15 mm (in Flush-Fit) Up to 10 user cards can be programmed in private mode Long battery life (25,000 locking cycles / approx. 3 years) Compatibility with all BURG Type B bolts Important to Note! To use all functions of the lock, at least 3 cards are required, and the mode change can only be set via the separately available mode change card. For sample orders, we recommend ordering the starter set. The necessary batteries are not included as standard! We recommend using original VARTA 1/2 AA batteries, as this ensures proper operation from our side! You can order the batteries directly from our shop. Scope of Delivery 1x Locking system 1x Transponder card1x Bolt fixing screw M6 x 12 mm 1x Mounting insert (only in Flush-Fit) 1x M19 nut 3x Type B bolts What Batteries Should Be Used?Using high-quality brand batteries is absolutely essential for the flawless functioning of the lock. The locking systems are factory-approved for the specified industrial batteries of the VARTA brand. The use of other batteries may result in a reduced number of possible locking cycles. In addition, limited functionality and/or functional problems are likely. Experience shows that other batteries, even with the same specifications, have different performance characteristics. Therefore, BURG does not guarantee the (functionality) of the lock when using batteries other than those mentioned above.

RFID Lock Niro.RFID – The Versatile Electronic Cabinet Lock for Modern Applications The Niro.RFID by BURG is an innovative electronic furniture lock specifically designed for use in offices, fitness studios, wellness facilities, and public buildings. It offers a wireless, keyless solution for cabinets, lockers, storage compartments, and mailboxes. With its robust metal construction and contactless transponder operation, the lock ensures both security and user-friendliness. Product Features Modern Design: The lock features a sleek black finish that integrates seamlessly into any environment. Durable and High-Quality: The robust metal construction provides long-lasting durability, ideal for heavy use in public facilities. Fast and Secure Operation: The ergonomic RFID technology allows for contactless operation with a card or chip, offering quick and secure usage. Versatile Use: The Niro.RFID is suitable for cabinets, lockers, storage compartments, and mailboxes, and can operate in both private and multi-user modes. Wireless and Battery-Powered: The lock is powered by a long-lasting battery cell, ensuring extended wireless operation. Installation and Operation Installing the Niro.RFID is straightforward and uses the standard mounting holes commonly found in cabinets and lockers. The lock can be installed without additional wiring. FAQ 1. How long does the Niro.RFID battery last? The Niro.RFID battery lasts approximately 24 months, depending on usage, and can be easily replaced. 2. Can the lock be used for both metal and wooden cabinets? Yes, the Niro.RFID is equally suitable for cabinets made of metal and wood. 3. Is the lock waterproof? The Niro.RFID is splash-proof, making it ideal for use in changing rooms and wellness facilities. 4. How many users can use the lock in multi-user mode? The multi-user mode allows an unlimited number of users to access the lock. Scope of Delivery 1x Niro.RFID Furniture Lock 3x Type B Latches 1x RFID Transponder Card 1x M19 Nut 1x Steel screw M4 x 10 mm1x Wood screw M4 x 28 mm² (for door thicknesses from 18 mm to 22 mm)1x Bolt fixing screw (M5 x 5.8 mm)1x Washer for locking direction 1x Rubber Gasket 1x User Manual Note: Master key is not included in the scope of delivery!

Electronic code and RFID lock TwinPad for wooden furniture, lockers and doorsThe TwinPad electronic furniture lock offers you the option of using the lock both by entering a code and with an RFID transponder. The common reading methods MIFARE® Classic 1K and MIFARE® DESFire Evo are supported as RFID transponder media. Installation and operation The unit can be mounted in the desired location using the enclosed screws. After the connection cable and batteries have been placed correctly, the lock can be used. It is possible to use the lock in multi-user mode (multi-user authorization) or to set it to private mode (permanently assigned authorization). In order to allow more users access via transponder, BURG offers compatible transponder chips and transponder cards.Product features Dual mode: operation via code and RFID access ( MIFARE® Classic 1K/ MIFARE® DESFire EV )Multi-user mode and private modeFlexible installation (DIN-right / DIN-left)Bolt-functionSlim front unit with metal frameAuto alarm after 4 failed opening attemptsEmergency power supply with mini-USB portAdjustment of signal volume using volume card (not included in delivery)Latch function - door can be locked by pressing itSuitable accessoriesThe TwinPad offers the possibility to register several transponders in private mode. That means that up to 27 transponders can interact with the lock simultaneously. BURG offers both a transponder card as well as a transponder chip. The transponders can be found below.Delivery Content1x operating unit 1x clamping unit with battery compartment 1x locking unit 1x USB-C cable for emergency power supply 1x reset needle (configuration needle) 2x screws: M4 x 29.5 3x wood screws: 3.4 x 20 1x screw: 3 x 8 (for the battery cover) Frequently asked questions:Does the TwinPad have a fingerprint function? - No. The TwinPad can only be opened using a code or transponder.Can I use any transponder for the TwinPad? - The frequency of the transponder is significant. BURG offers compatible transponders. If you use transponders from another manufacturer, we cannot guarantee flawless function.  Which batteries should be used? -The use of high-quality brand batteries is absolutely essential for the lock to function correctly. The locking systems are approved ex works for the specified VARTA brand industrial batteries. The use of other batteries can lead to a reduced number of possible locking cycles. In addition, limited functionality and/or functional problems are likely. Experience shows that other batteries, even with the same specifications, have different performance characteristics. Therefore, BURG does not guarantee the (functionality) of the lock when using batteries other than those specified above.

QLEO.RFID - Electronic metal locker lock with RFID function The QLEO.RFID is an advanced electronic metal locker lock that offers you a first-class security solution with RFID function. With its innovative features and user-friendly operation, it is the ideal choice for tool cabinets, lockers and metal lockers. The state-of-the-art electronic bolt lock, specially developed for use in metal lockers. It enables reliable and secure locking without the use of a conventional key. The QLEO.RFID is ideal for tool cabinets, metal cabinets and lockers in various environments such as workshops, storage rooms, offices and gyms. Product features The QLEO.RFID offers a range of advanced functions, including The master, manager and user card roles ensure flexible access control. Private mode and multi-user mode with occupancy code for individual or shared use. Battery operation with a service life of up to 30,000 locking cycles for long-lasting performance. Option to use push bars and deadbolts with 3-point locking for added security. Assembly and operation Installing the QLEO.RFID is simple and straightforward. It can be mounted using the existing fixing points of your cabinet or locker without the need for additional drilling. By clipping it into the standard installation hole and inserting the batteries, the lock is immediately ready for use. The RFID version of the QLEO is operated with conventional transponder cards, chips or wristbands. This requires the RFID standard Mifare Classic or Mifare DesFire. Scope of delivery 1x QLEO.RFID handle lock3x BURG bolt type B (653 K, 656 K and 659 G)1x Transponder card1x two-point bolt type B 1x fixing screw Note: Batteries are not included! Which batteries should be used? The use of high-quality brand batteries is absolutely essential for the lock to function correctly. The locking systems are approved ex works for the specified VARTA brand industrial batteries. The use of other batteries can lead to a reduced number of possible locking cycles. In addition, limited functionality and/or functional problems are likely. Experience shows that other batteries, even with the same specifications, have different performance characteristics. Therefore, BURG does not guarantee the (functionality) of the lock when using batteries other than those specified above. .