Intro.Code
Intro.Code
€48.96
Available, delivery time: 2 - 3 days
- Battery change without disassembling the lock
- Retrofittable thanks to 19mm x 16mm hole
- Adjustable bolt in 45° steps
Intro.Code
Installation and operation
Product features
- ergonomic handling
- external battery change
- easy retrofitting
- bolt adjustable in 45° steps
- emergency power supply via micro USB port
- multiuser mode
- Private mode
- Emergency opening via master code
- LED signals in certain scenarios
Content Delivery Overview
- 1x Intro.code
- 1x bolt
- 1x battery tray
- 1x M19 nut
Frequently asked questions
Does the Intro.Code also have an RFID function?
Do I need any other accessories for the Intro.Code in order to lock?
Which batteries should be used?
YouTube
| Backset: | 38mm |
|---|---|
| Battery: | 1x CR2450 |
| Battery life (locking cycles): | approx. 3.000 |
| Bolt fastening: | Screw |
| DIN-Stop: | left |
| Emergency power supply: | yes |
| Head-Diameter: | 43,3mm |
| Lock fastening: | M19-screw-nut |
| Locking angle: | 90° right |
| Locking movement: | right |
| Material: | Zamak / plastic |
| Material thickness: | 18mm |
| Modes: | Multiuser mode, Private-mode |
| Mounting hole (mm): | 16 x 19 |
1. Product name
Intro.Code – electronic PIN code lock for wooden and steel furniture, suitable for cabinets and compartments (Model: W-EIN; cut-out 16 × 19 mm, max. door thickness 18 mm).
2. EU Declaration of Conformity
This product complies with the applicable EU safety requirements.
3. Important safety information
- Installation in existing standard cut-out 16 × 19 mm with supplied nut.
- Three latch variants included; adjustable in 45° increments.
- Configurable for private or multi-user mode via master code.
- Not suitable for gyms, wellness facilities or department stores; use Flexo series for these applications.
4. Special features
- Ergonomic handling and touch operation.
- External battery replacement possible without removing the lock.
- Emergency power supply via Micro-USB connection.
5. Battery information
- Required: 1 × CR123A lithium battery (high-quality brand batteries recommended).
- User-replaceable at any time.
- Low battery warning signal; battery life several tens of thousands of locking cycles depending on usage.
6. Maintenance and service life
- Regularly check the fixing nut and latch for secure fit.
- Replace the battery in good time to avoid malfunctions.
- Clean with a soft, dry or slightly damp cloth; do not use aggressive cleaning agents.
7. Disposal
- Dispose of electronic components and batteries separately and properly via appropriate collection points.
- Do not dispose of in household waste.
8. Target users / age recommendation
For professional adult users. Children may operate the lock only under supervision.
9. Manufacturer information
Burg Lüling GmbH & Co. KG
Volmarsteiner Straße 52, 58089 Hagen, Germany
Phone: +49 2335 6308450
E-mail: webshop@burg.de
Login
Accessories
Lithium battery Varta CR2450 560mAh suitable for: Intro.Code Intro.RFID Scope of delivery: 1x Varta CR2450 button cell.
Instruction Sticker for Intro.Code (Multiuser Mode) Practical instruction sticker for the Intro.Code electronic lock in multiuser mode. The clearly structured step-by-step guide makes operation easy for changing users – ideal for direct application to lockers or furniture. The compact A7 format allows for discreet placement and can be removed without leaving residue when needed. Note: This is the German-language version of the sticker. An English version is available upon request. Key Features Clear usage instructions for Intro.Code in multiuser mode Perfect for shared-use lockers and furniture in schools, offices, or gyms Easy-to-follow, step-by-step format Space-saving A7 format Residue-free removal Scope of Delivery 1× Instruction sticker (A7) for Intro.Code – Multiuser Mode (German)
Anti-twisting device and mounting bezel for lockers and wooden- furnitureThe security set consists of an anti-twisting device and a cover plate to prevent the lock from being forcibly unscrewed in lockers, cupboards and lockers made of wood with round installation holes.How to mount the security set?First, the anti-twisting device is pushed onto the threaded body of the lock and the lock is inserted into the hole. Now place the cover disc on the lock from behind. Then place the M19 nut on the threaded body and tighten it so that the teeth of the anti-twisting device press into the material and prevent the lock from rotating in the hole.Compatible with following products:Locker locks W-VRB-01 W-VRB-02 W-VRB-03 W-VRB-04 W-VRB-05 Cam locks W-HEB-04 W-HEB-05 W-HEB-07W-HEB-08 W-HEB-15 W-HEB-16 W-HEB-17 W-HEB-44Combination locks W-ZCS-02 W-ZCS-03 W-ZCS-06 Delivery contents:1x Anti-twisting device1x Mounting-bezel
The hexagon nut, which is made of 100% brass, is ideally suited as a fixing element for cam locks, sash locks, combination locks and locker locks. The locking width of the fixing nut is 22x3.2.Compatible with:W-VRB-01 W-VRB-02 W-VRB-03 W-VRB-04 W-VRB-05 W-HEB-04 W-HEB-05 W-HEB-07 W-HEB-08 W-HEB-15 W-HEB-16 W-HEB-17 W-HEB-44 W-ZCS-02 W-ZCS-03 W-ZCS-06Delivery content overview:1x fixing nut M19
Compatible bolts
Type-B bolt with rod acceptance for BURG handle, lever, bolt, and furniture locksWith this latch, various locks with the catch receptacle for the BURG Latch Type B can also be retrofitted to a two-point locking system using rods.InstallationThe latch, along with the tension spring, is placed onto the suitable catch receptacle on the lock and secured with a nut or screw. Now, the rods can be placed onto the rivet tips and secured against dislodging by turning the tension spring.Included in delivery1x Latch Type B1x Tension Spring
Compatible angled locking plates
Locking angle SW1 The locking bracket is an optimal accessory for wooden furniture cam locks, screw-on locks and espagnolette locks. The material is steel and the surface is nickel-plated. How is it mounted?The striking plate is screwed to the wood with 2 wood screws at a 90 degree angle. The mounting bracket is easy to fit and ensures a secure hold for the transom.Scope of delivery:1x Locking angle SW1 8mm
Locking angle SW2 Counterpart for deadbolt locks, for locking lockers, compartments and cabinets. Suitable for use with lever, furniture, code and sash locks. The striking plate is made of steel and the surface is nickel-plated. The angle offers a surface of 12mm with which the bolt is held. Further dimensions can be found in the picture gallery.How is it mounted? The striking plate is screwed to the wood at a 90 degree angle with 2 wooden screws. The retaining bracket is easy to fit and ensures that the bolt is held securely. Scope of delivery: 1x locking angle SW2
Locking angle SW3 Counterpart for cam locks, for locking lockers, compartments and cabinets. Suitable for use with lever, furniture, code and sash locks. The striking plate is made of steel and the surface is nickel-plated.The angle with which the bolt is held provides a surface of 11 mm. Further dimensions can be found in the picture gallery. How is it mounted? The striking plate is screwed to the wood at a 90 degree angle with 2 wood screws. The retaining bracket ensures a secure hold and is easy to fit. Scope of delivery1x Locking angle SW3 11mm
Locking angle SW5 Counterpart for cam locks, for locking lockers, compartments and cabinets. Suitable for use with lever, furniture, code and sash locks. The striking plate is made of steel and the surface is nickel-plated.The angle offers a surface of 9.5 mm with which the bolt is held. Further dimensions can be found in the picture gallery. How is it mounted? The striking plate is screwed to the wood with 2 wood screws at a 90 degree angle. The mounting bracket is easy to fit and ensures a secure hold for the transom. Scope of delivery:1x Locking angle SW5 9.5mm
Locking angle SW9 The locking bracket is an optimal accessory for wooden furniture cam locks, screw-on locks and espagnolette locks. The material is steel and the surface is nickel-plated. How is it mounted? The striking plate is screwed to the wood with 2 wood screws at a 90 degree angle. The mounting bracket is easy to fit and ensures a secure hold for the transom. Scope of delivery:1x Locking angle SW9 9.5mm
Suitable batteries
Lithium battery Varta CR2450 560mAh suitable for: Intro.Code Intro.RFID Scope of delivery: 1x Varta CR2450 button cell.