RFID transponder chip MIFARE Classic 1K 13.56 MHz black The black transponder card can be used as a convenient key replacement for our RFID locks in wooden furniture. It communicates on the 13.56 MHz standard MIFARE Classic 1K and is almost unnoticeable on the key ring due to its compact size. Which locks is this transponder chip compatible with? Intro.RFID W-EIR-01 Master Pro W-EMS-02 TwinPad W-TWP-01 Delivery Content:1x transponder chip black

RFID transponder labels  Our RFID transponder labels offer a powerful solution for identifying and tracking objects. These compact labels are equipped with RFID technology that makes it possible to capture information wirelessly and precisely. Simply stick them on the desired objects and benefit from the advantages: -Contactless identification: our RFID transponder labels do not require physical contact to exchange information. Simply hold them in front of the reader and the data is captured.  - Efficient data capture: With RFID technology, you can capture information in seconds. Ideal for inventory management, access control and more. - Versatile application possibilities: Our labels are customisable and can be used for various applications including logistics, asset tracking, library management and product security - Durable and reliable: RFID transponder labels are robust and can withstand the rigours of everyday use. They offer a reliable identification solution that lasts a long time. - Easy integration Our labels are compatible with a wide range of RFID readers and systems. Integration into your existing infrastructure is straightforward. Experience the benefits of modern identification technology with our RFID transponder labels. Order today and optimise your processes.  Scope of delivery: 1x Mifare Classic Smartlabel

RFID transponder card MIFARE® Classic 1K 13.56 MHz The transponder card can be used as a convenient key replacement for our RFID locks in wooden furniture. It communicates on the 13.56 MHz MIFARE® Classic 1K standard. The lock can be opened and closed simply by holding it in front of the lock.Which locks is this transponder card compatible with?Intro.RFID W-EIR-01Flexo.RFID W-FRR-01Master Pro W-EMS-02TwinPad W-TWP-01 Scope of delivery1x transponder card

Transponder mode change card for Intro.RFID and Flexo.RFID locks This function card is an RFID card, for switching between multi-user and private mode. OperationHold the card out briefly. To ensure proper functioning, avoid pressing too hard.Scope of delivery1x mode change card

Reset Card Flexo.RFIDThe reset card allows you to reset the Flexo.RFID to factory settings, for example, to retrain incorrectly trained or lost master cards.Scope of Delivery1x Reset Card for Flexo.RFID

High-range card for use on RFID locks with the 125 kHz radio standard. Compatible with all 125 kHz locks and set component of W-EMS-01. Delivery Overview: 1x High-range transponder card 125 kHz

Yellow Sticker for Identifying Master Cards With this small, eye-catching yellow sticker, you can clearly and visibly mark transponder cards that have been programmed as master cards on a lock. Especially when dealing with multiple cards, clear labeling is essential to stay organized and prevent accidental misuse. The sticker helps you quickly identify master cards – ideal for organization, safety, and clarity in daily use. Product Details: Color: Signal Yellow Adheres securely to standard transponder cards Ideal for permanent labeling of master cards Compact size – does not interfere with usage Color: Signal Yellow Scope of Delivery 1x Master Card Sticker Note: This is not a master card, but only the sticker for labeling!

Sector Card Set The Sector Card Set is used for programming RFID cards for the electronic Flexo RFID Lock (Item No. W-FRR-01). By default, the system uses Sector 15 to store access permissions. If this sector is already occupied by other functions on your transponder, the affected transponders cannot be used with this lock. With the Sector Card Set, you can alternatively write to a different sector. This increases the potential usability of RFID cards, especially in cases where Sector 15 is already assigned by other systems or previous configurations. How to use the Sector Card: Hold the desired sector card (Sector Card 1 to 15) in the center of the lock. Two long signal tones and the green LED confirm a successful operation. Function Note: By holding the sector card to the lock, the Flexo RFID Lock is reconfigured to the selected sector. All newly programmed cards will then be encoded using this selected sector. This is especially necessary when the default Sector 15 is already in use by other applications. Scope of Delivery: 1x Sector Card Set (Sectors 1–15) for the Flexo RFID Lock

Volume Card TwinPad With the help of the Volume Card, the volume of the signal tones on the TwinPad can be adjusted. You can set the volume to "LOUD", "QUIET", or "OFF". Scope of Delivery 1x Volume Card TwinPad

RFID transponder card 125 kHzThe transponder card can be used as a convenient key replacement for our RFID locks in wooden furniture. It communicates on 125 kHz. The lock can be opened and closed simply by holding it up to the lock. Which locks is this transponder card compatible with?W-EMS-01Scope of delivery1x transponder card

Sector Card Set The Sector Card Set is used for programming RFID cards for the electronic Niro.RFiD lock (Item No. W-NIR-01). By default, the system uses Sector 15 to store access rights. However, if this sector on your transponder is already occupied by other functions, the corresponding transponders cannot be used with this lock. With the Sector Card Set, you can alternatively write cards using a different sector. This increases the potential usability of RFID cards, especially in cases where Sector 15 is already used by other systems or previous configurations. How to Use the Sector Card: Hold the desired sector card (Sector Card 1 to 15) in front of the center of the lock. Two long signal tones and the green LED light confirm the successful process. Function Note: By holding the sector card in front of the lock, the Niro.RFiD lock is switched to the respective sector. Cards written afterward will be encoded on this selected sector. This is particularly necessary if the default sector (Sector 15) is already occupied by other applications.

The Card Starter Set for Flexo.Cloud contains 5 transponder cards (MIFARE® Classic 1K) including a master, manager and user card. The cards are supplied unprogrammed and are intended for self-programming. Features MIFARE® Classic 1K technology, so that you can use transponder cards in the intended system environment. 5 cards in the set, so that you have several cards immediately available for set-up and use. 1x master card (labelled yellow), so that the master card can be quickly identified in everyday use. 3x manager cards (labelled green), so that several manager cards are available in parallel. 1x user card (unlabelled), so that a neutral user card without marking is included. Unprogrammed, so that you can programme the cards yourself according to your needs. Two-colour card sides (black and light grey), so that the cards are visually easy to distinguish. BURG CI on both sides, so that the set offers a consistent appearance. Plastic design, so that the cards have the typical card format for daily use. Scope of delivery 1x transponder card MIFARE® Classic 1K – master card (labelled yellow) 3x transponder card MIFARE® Classic 1K – manager card (labelled green) 1x transponder card MIFARE® Classic 1K – user card (unlabelled) FAQ Are the cards already programmed?No, the cards are not programmed and are intended for self-programming. What technology do the cards use?The cards are MIFARE® Classic 1K transponder cards. How do I identify the master, manager and user card?The master card is labelled yellow, the manager cards are labelled green, the user card is unlabelled. What do the cards look like?One side is black (with or without a sticker), the other side is light grey; BURG CI is present on both sides.

Sector Card Set – For Sector Configuration on the Transponder Release Box The sector card set allows targeted configuration of the memory sector used by the Transponder Release Box. By default, Sector 15 is used when programming transponders. If this sector is already occupied by other applications, transponders may not be correctly read or written. Using the sector cards (Sectors 1 to 15), the Transponder Release Box can be configured so that all newly programmed transponders are encoded on the selected sector. This increases compatibility and flexibility when using different RFID systems – especially in environments where multiple solutions are used in parallel. How to Use the Sector Card: Hold the desired sector card (1 to 15) in the center of the Transponder Release Box. Two long signal tones and a green LED light confirm successful sector change. Function Note: After a successful change, the Transponder Release Box will store new authorizations exclusively on the selected sector. This is especially useful if the default Sector 15 is already used by other systems or earlier configurations. Scope of Delivery 1x Sector Card Set for the Transponder Release Box