Recessed handle GSP for steel and double-door cabinets and lockers (shell, recessed or flush handle lock) The rectangular recessed handle with a practical black grip is designed for securing metal lockers with single or double doors. It is therefore ideal for use in workshops, offices, schools, universities, department stores, changing rooms, and many other facilities. Installation and operation The recessed handle is installed without tools using several clips located on the sides at the back of the lock. You can find a short instructional video at the bottom of this page. By turning the handle, the lock secures the door front with a bolt. Turning the key supplied in the locking cylinder then blocks the handle, securing the lock. Unlocking the cylinder releases the handle again, allowing a 90° turn to open the door front. Product features A 3-point locking system can be implemented. If a key is lost, replacement keys can be easily reproduced. Furthermore, multiple individually keyed handles can be opened with a master key. Lock cylinders can also be replaced or reproduced without purchasing a completely new lock (see below “compatible replacement cylinders”). Thanks to the standardized mounting cut-out of 72 x 72 mm, the handle can be exchanged with any other recessed handles from the BURG range. Compatible accessories To accommodate complex installation situations, various type B bolts can be mounted on the rear side of the lock. Scope of delivery 1 x Recessed handle GSP 1 x Cylinder core (installed) 1 x Bolt with offset: 10 mm / Backset: 70 mm 1 x Bolt with offset: 0 mm / Backset: 59 mm 1 x Bolt with offset: 6.5 mm / Backset: 70 mm 1 x Two-point bolt 2 x Steel keys type X

Recessed handle GSC for steel and double-door cabinets and lockers The rectangular recessed handle with a practical silver grip is ideal for securing metal lockers with single or double doors. It is perfectly suited for use in workshops, offices, schools, universities, department stores, changing rooms, and many other environments. Installation and operation The recessed handle is installed without tools using side clips located on the back of the lock. A short installation video can be found at the bottom of this page. By turning the handle, the door front is locked via a bolt. Once the cylinder is locked, the handle is blocked and the lock secured. After unlocking, the handle can be turned 90° to open the door again. Product features 3-point locking system possible – compatible with type B bolts Lost keys can easily be replaced – e.g. replacement key order Master key function for differently keyed handles Lock cylinders can be easily exchanged – see compatible replacement cylinders Standard cut-out 72×72 mm – compatible with all BURG recessed handles Compatible accessories For complex installation situations, various type B bolts can be mounted on the back of the lock. Scope of delivery 1× Recessed handle GSC 1× Cylinder core (installed) 1× Bolt with offset: 10 mm / Backset: 70 mm 1× Bolt with offset: 0 mm / Backset: 59 mm 1× Bolt with offset: 6.5 mm / Backset: 70 mm 2× Steel keys type X 1× Two-point bolt holder

Type-B bolt individually for BURG locks  (locking tongue, locking plate) With the uniform BURG bolt-standard, all type-B bolts fit on every BURG lock with type-B bolt receiver. This means that even complex individual installation situations can be easily implemented.Delivery contents:1x type-B bolt (individual)

Recessed handle GST for steel and metal lockers (shell handle, recessed grip, flush handle, cup handle) The recessed handle locking system set with an oval plastic handle is particularly suitable as a locking solution for, for example, double-door cabinets or metal lockers in changing rooms, workshops, warehouses, production facilities, or sports complexes. Installation and operation The lock can be installed without tools and is designed for easy assembly. To mount it, the handle is inserted into the prepared cut-out and secured from the inside using the integrated clips. At the end of this page, you will find a short video demonstrating the installation. The lock operates by inserting a type X key, which locks or unlocks the handle’s rotation. Turning the handle engages the bolt and/or locking rods to secure the locker door. Product features The lock can be installed for both right-hand and left-hand operation. It allows for quick and simple installation and supports 1-, 2-, or 3-point locking using bolts and locking rods. The locking cylinder can be easily replaced and customized with specially made interchangeable cores. Even if the keys are lost, additional replacement keys can be produced at any time. In addition, a separate master key can be used to open an entire system. Use of accessories The set comes with 3 different bolts and can be extended with additional custom bolts from our shop following the BURG standard type B. With the mounting kit, old locking cylinders can be replaced and adapted to new applications. The lock comes with 2 type X keys as standard, but additional keys can also be produced. You can find this and other accessories at the end of this page. Scope of delivery 1x Recessed handle GST 1x Cylinder core (installed) 1x Bolt with offset: 10 mm / Backset: 70 mm 1x Bolt with offset: 0 mm / Backset: 59 mm 1x Bolt with offset: 6.5 mm / Backset: 70 mm 1x Two-point bolt 2x Steel keys type X

You have the BURG handle lock (old series: GSB, GSD, GSF, GSG) in use and would like several locking cylinders to be able to be locked with one key. No problem! With the interchangeable cylinders (W-WKG) for BURG handle locks of the GSP, GSC and GST series, you can turn your keyed different cabinet system into a keyed alike one. You order several keyed alike exchangeable cylinders.(NOT suitable for GSB, GSD, GSF and GSG handles).With the help of the mounting set (not included) you can remove the exchangeable cylinders of your current handle locks, provided that they are not locked. The new keyed alike cylinder core is inserted, the assembly key is pulled out. Done! Each exchangeable cylinder is delivered as a set with two matching keys (X-profile reversible key). Additional keys can be ordered later. This spare part allows you to lock any number of steel furniture with handle locksuniformly. Caution: The older models of the handle lock (GSD, GSB and GSF) use a different cylinder, see product number W-WKF.Content delivery overview:1x handle locks exchangeable cylinder2x type-X steel key

The three-part Mounting set for consists of a disassembly key, an assembly aid and a release needle. The disassembly key is used to remove the locking cylinder. The assembly aid is used to change the locking direction (right/left). You can use the release needle to remove your knob.

You have the BURG handle lock (old series: GSB, GSD, GSF, GSG) in use and would like the cylinder and key to be replaced. No problem! Replacement cylinders for BURG handles of the GSB, GSD, GSF and GSG series make this possible. ATTENTION: The cylinder does NOT fit the current series GSP, GSC, GST.Assembly requires manual skillfullness, but NOT an assembly kit, as with the current models. By loosening the snap ring, the exchange cylinder of your handle lock can be removed, provided that they are not locked. The new cylinder core is inserted and the snap ring is fixed again. Each exchange cylinder is supplied as a set with two matching keys (F-profile reversible key). Further keys can be ordered later. Content delivery overview:1x exchangeable cylinder2x type-F steel keys

Are you looking for an exchangeable cylinder for your BURG handle lock that fits your existing system? No problem! With the repro exchangeable cylinder (W-WGR-01) for BURG handle locks of the GSP, GSC and GST series, you can have an exchangeable cylinder manufactured according to your locking system. Through the Repro ("Reproduction") option, new locking systems are handcrafted according to the desired locking. The new product can be used with the existing keys (X-profile). This makes it possible to renew or expand the system without having to issue new keys. Due to the manual production, the products of the RePro line have a slightly longer delivery time. With the help of the installation set (not included in the delivery content), the cylinders of your BURG lock can be removed, provided that they are not locked. The new cylinder core is inserted into the lock, the assembly key is pulled out. Done! Each exchange cylinder is supplied as a set with two matching keys (X-profile). Additional keys can be ordered later. Important: Repro articles are excluded from exchange, as they are manufactured individually for you. Handle lock exchangeable cylinders (repro) do NOT fit the GSD handle lock, as it has a built-in cylinder.Content delivery overview:1x exchangeable cylinder for handle locks for desired locking number2x type-X steel key

Type-B bolt with rod acceptance for BURG handle, lever, bolt, and furniture locksWith this latch, various locks with the catch receptacle for the BURG Latch Type B can also be retrofitted to a two-point locking system using rods.InstallationThe latch, along with the tension spring, is placed onto the suitable catch receptacle on the lock and secured with a nut or screw. Now, the rods can be placed onto the rivet tips and secured against dislodging by turning the tension spring.Included in delivery1x Latch Type B1x Tension Spring

The BURG handle lock of the GSD series has been used for decades in a wide variety of steel furniture from well-known manufacturers. It is therefore in daily use in countless industrial and craft businesses.Handle shells are often used as keyed alike security devices, which are used by different users. Each handle shell is supplied with 2 keys. Additional spare keys (F-profile) can be ordered. The mounting hole is 72mm x 72mm.Delivery content overview:1x Handle lock GSD 3x Type-B bolt2x type-F steel key

The Keysy "Basic" handle lock is the inexpensive alternative to BURG handle locks. Cabinets and lockers can be closed quickly and easily. The handle cannot be turned when locked. The installation hole is 72 mm x 72 mm.Note: This is a clearence sale.Delivery Content Overview:1x Handle Lock Basic3x type-G bolts2x keys

QLEO.RFID - Electronic metal locker lock with RFID function The QLEO.RFID is an advanced electronic metal locker lock that offers you a first-class security solution with RFID function. With its innovative features and user-friendly operation, it is the ideal choice for tool cabinets, lockers and metal lockers. The state-of-the-art electronic bolt lock, specially developed for use in metal lockers. It enables reliable and secure locking without the use of a conventional key. The QLEO.RFID is ideal for tool cabinets, metal cabinets and lockers in various environments such as workshops, storage rooms, offices and gyms. Product features The QLEO.RFID offers a range of advanced functions, including The master, manager and user card roles ensure flexible access control. Private mode and multi-user mode with occupancy code for individual or shared use. Battery operation with a service life of up to 30,000 locking cycles for long-lasting performance. Option to use push bars and deadbolts with 3-point locking for added security. Assembly and operation Installing the QLEO.RFID is simple and straightforward. It can be mounted using the existing fixing points of your cabinet or locker without the need for additional drilling. By clipping it into the standard installation hole and inserting the batteries, the lock is immediately ready for use. The RFID version of the QLEO is operated with conventional transponder cards, chips or wristbands. This requires the RFID standard Mifare Classic or Mifare DesFire. Scope of delivery 1x QLEO.RFID handle lock right3x BURG bolt type B (653 K, 656 K and 659 G)3x Transponder card (BURG-Design)1x two-point bolt type B 1x fixing screw Note: Batteries are not included! Which batteries should be used? The use of high-quality brand batteries is absolutely essential for the lock to function correctly. The locking systems are approved ex works for the specified VARTA brand industrial batteries. The use of other batteries can lead to a reduced number of possible locking cycles. In addition, limited functionality and/or functional problems are likely. Experience shows that other batteries, even with the same specifications, have different performance characteristics. Therefore, BURG does not guarantee the (functionality) of the lock when using batteries other than those specified above.

Additional key suitable for the keyed alike exchangeable cores (W-WKG- ...) for handle locks. The exchangeable cylinders (W-WKG-...) for BURG handle locks of the GSP, GSC and GST series allow you to turn your keyed different cabinet system into a keyed alike one. Here you can order additional keys. ATTENTION: This key fits ONLY with the keyed alike exchange cylinders ordered in the webshop.Additional keys are excluded from exchange.Content delivery overview:1x type-X steel key

QLEO.code - electronic numeric code handle shell for metal cabinets The QLEO.code is an innovative electronic metal locker lock that offers you the ultimate in security and flexibility. With its pin code function and a variety of intelligent features, it is the perfect solution for use in tool cabinets, lockers and metal cabinets. Product features Master and user code for flexible access control Private mode and multi-user mode for individual or shared use Battery operation with a service life of up to 30,000 locking cycles for long-lasting performance Option to use push bars and deadbolts with 3-point locking for added security Usage The QLEO.code is a state-of-the-art electronic bolt lock that has been specially developed for use in metal cabinets. It replaces conventional locks and offers a secure and user-friendly locking solution. It is ideal for tool cabinets, metal cabinets and lockers in various environments such as workshops, storage rooms, offices and gyms. Mounting and operation How is the lock installed? Installing the QLEO.code is simple and straightforward. It can be mounted using the existing fixing points of your cabinet or locker without the need for additional drilling. The mounting holes of the locker handle are standardised and are compatible with those of BURG, Ronis and Euro-Locks. No tools are required to fit the lock, but you may need to fix the push bars in place. Scope of delivery 1x QLEO.code handle lock3x BURG bolt type B (653 K, 679 K und 659 G) 1x two-point bolt type B 1x fixing screw Note: Batteries are not included! Which batteries should be used? -The use of high-quality brand batteries is absolutely essential for the lock to function correctly. The locking systems are approved ex works for the specified VARTA brand industrial batteries. The use of other batteries can lead to a reduced number of possible locking cycles. In addition, limited functionality and/or functional problems are likely. Experience shows that other batteries, even with the same specifications, have different performance characteristics. Therefore, BURG does not guarantee the (functionality) of the lock when using batteries other than those specified above.

The BURG handle lock GSD813 (repro) by locking number complements their already purchased handle locks.The BURG handle locks of the GSD, GSB and GSF series have been used for decades in a wide variety of steel furniture from well-known manufacturers. They are therefore in daily use in countless industrial and craft businesses.Often the handle is used as a keyed alike safety device, which is used by different users. In case of extension or replacement, a new product with exactly this existing lock is therefore often desired.The GSD model has no longer been produced in series since 2016. Through the Repro ("Reproduction") option, new locking systems are handmade according to the desired lock. The new product can be used with the existing keys (F profile). Thus, it is possible to renew or expand the system without having to issue new keys. Due to the handmade production, the products of the Repro line have a slightly longer delivery time.Each Repro handle is delivered with 2 keys. Additional spare keys (F-profile) can be ordered. The installation hole 72mm x 72mm is identical.Content delivery overview:1x Handle lock GSD by desired locking number3x type-B bolts2x type-F steel keys by desired locking number

Individual bolts for purchase. Compatible with the GST, GSC, GSP and GSD grip panels.Scope of delivery at a glance:1x bolt type G (div.)

The locking system is designed for use in storage cabinets in industrial halls or offices. Its understated design gives it a sustainable look. Turning the key on the front face 90 degrees to the left or right unlocks the system and releases the handle for operation. Pulling the handle retracts the linkage and the bolt. After operation, the handle automatically returns to its original position so that it does not protrude. When the door is pushed shut again, the linkage and bolt fall back into the locked position, so that the lock automatically locks the door.AdvantagesVery flat designPractical latch function3-point lockingScope of delivery at a glance:1x recessed lever handle2x steel keys, type X