Flexo.Code
- Flexible installation options
- compatible with all BURG type B transoms
Flexo.Code
Installation and operation
To lock the lock, a user-defined PIN code is entered on the keypad. Subsequently, the lock releases the latch, and by rotating the rear-mounted bolt to the locking position at a 90° angle, the door is securely locked, preventing unauthorized access. The lock can be used in both private and multi-user modes for various application scenarios. For more information, please refer to the download section above this description.
Product features
- ergonomic handling and high-quality design
- external battery access and battery replacement without dismantling the locking system
- (definable time control and adjustable locking duration)
- easy retrofitting, e.g., for replacing mechanical locker locks
- adjustable latch (in 90° increments)
- minimal front projection of only 15mm (in Flush-Fit)
- high-quality keypad with tactile feedback
- long battery life (30,000 locking cycles / approximately 3.5 years)
- compatibility with all BURG type B latches
Important to note!
Scope of delivery
Which batteries should be used?
| Battery: | 2x CR1/2 AA H-R |
|---|---|
| Battery life (locking cycles): | approx. 30.000 |
| Bolt-type: | B |
| Head-Diameter: | 50mm |
| Locking angle: | 90° |
| Master-Key function: | yes |
| Material: | Messing, Plastic, Zamak (zinc-die casting) |
| Material thickness: | 22mm |
| Modes: | Multiuser mode, Private-mode |
| Mounting hole (mm): | 16 x 19, 45 x 47 |
| Possible number of codes: | 999.999 |
| Programmable user PINs: | max. 50 |
1. Product name
Flexo.Code – electronic PIN code lock for lockers, cabinets and furniture doors, designed for installation in standardized BURG cut-outs (Model: W-FC ; up to 999,999 code variations, memory for up to 50 PIN codes).
2. EU Declaration of Conformity
This product complies with the applicable EU safety requirements.
3. Target group
This safety notice is intended for users of the Flexo.Code, especially installers and end users. Installation and commissioning should be carried out by qualified personnel.
4. General safety instructions
- Read the entire user manual carefully before commissioning.
- Use only high-quality VARTA brand batteries to ensure flawless operation.
- The use of other batteries may lead to malfunctions.
5. Special warnings
- Batteries may explode or release flammable gases if handled improperly:
- Never recharge, disassemble, expose to extreme heat or throw batteries into fire.
- If the master code is lost, the lock cannot be reset without professional support. In this case, please contact BURG customer service.
- The lock may only be operated indoors at humidity levels of 10% – 80% and temperatures of 0 °C to 55 °C.
6. Instructions for use
- Check the installation dimensions before installation and ensure that the door thickness complies with the specifications.
- Configure an individual master code immediately after initial commissioning.
- Regularly check the battery indicator: A red LED signals when the battery power is running low.
7. Battery information
- Operated with 2 × CR123A lithium batteries (high-quality brand batteries recommended).
- External battery access allows replacement without removing the lock.
- Battery life: several tens of thousands of locking cycles, depending on usage.
8. Maintenance and service life
- Regularly check fixings and retighten if necessary.
- Replace batteries promptly to avoid malfunctions.
- Clean with a soft, slightly damp cloth; do not use aggressive cleaning agents.
9. Disposal
- Dispose of electronic components and batteries separately and properly via appropriate collection points.
- Do not dispose of in household waste.
10. Age recommendation
The Flexo.Code is intended for adults for professional and commercial use. It should not be operated by children without supervision.
11. Manufacturer information
Burg Lüling GmbH & Co. KG
Volmarsteiner Straße 52, 58089 Hagen, Germany
Phone: +49 2335 6308450
E-mail: webshop@burg.de
Login
Content: 2 Pieces (€4.00* / 1 Pieces)