TwinPad
Electronic code and RFID lock TwinPad for wooden furniture, lockers and doorsThe TwinPad electronic furniture lock offers you the option of using the lock both by entering a code and with an RFID transponder. The common reading methods MIFARE® Classic 1K and MIFARE® DESFire Evo are supported as RFID transponder media. Installation and operation
The unit can be mounted in the desired location using the enclosed screws. After the connection cable and batteries have been placed correctly, the lock can be used. It is possible to use the lock in multi-user mode (multi-user authorization) or to set it to private mode (permanently assigned authorization). In order to allow more users access via transponder, BURG offers compatible transponder chips and transponder cards.Product features
Dual mode: operation via code and RFID access ( MIFARE® Classic 1K/ MIFARE® DESFire EV )Multi-user mode and private modeFlexible installation (DIN-right / DIN-left)Bolt-functionSlim front unit with metal frameAuto alarm after 4 failed opening attemptsEmergency power supply with mini-USB portAdjustment of signal volume using volume card (not included in delivery)Latch function - door can be locked by pressing itSuitable accessoriesThe TwinPad offers the possibility to register several transponders in private mode. That means that up to 27 transponders can interact with the lock simultaneously. BURG offers both a transponder card as well as a transponder chip. The transponders can be found below.Delivery Content1x operating unit 1x clamping unit with battery compartment 1x locking unit 1x USB-C cable for emergency power supply 1x reset needle (configuration needle) 2x screws: M4 x 29.5 3x wood screws: 3.4 x 20 1x screw: 3 x 8 (for the battery cover) Frequently asked questions:Does the TwinPad have a fingerprint function? - No. The TwinPad can only be opened using a code or transponder.Can I use any transponder for the TwinPad? - The frequency of the transponder is significant. BURG offers compatible transponders. If you use transponders from another manufacturer, we cannot guarantee flawless function.
€61.80*
Intro.Code
Intro.CodeThe Intro.Code represents the entry into comfortable electronic locking for cabinets and lockers. Each Intro can be installed in both wooden and steel furniture. It can be conveniently used in both wooden and steel furniture. With its easy operation, the lock simplifies daily life and shines with its high-quality design and ergonomic handling. Thanks to its easy retrofitting capability through the standard mounting hole (Retro-Fit) and the flexibly adjustable latch, the lock effortlessly adapts to any installation situation.Installation and operationThe lock is inserted into a 16mm x 19mm mounting hole. The maximum door thickness is 18mm. The lock is fixed to the door with the enclosed nut. The enclosed bolt can then be mounted and aligned. The master code can be used to select private mode or multi-user mode. In both modes, the lock is opened by entering a PIN. Product featuresergonomic handling external battery change easy retrofitting bolt adjustable in 45° steps emergency power supply via micro USB port multiuser mode Private mode Emergency opening via master code LED signals in certain scenariosContent Delivery Overview1x Intro.code 1x bolt1x battery tray 1x M19 nutFrequently asked questionsDoes the Intro.Code also have an RFID function?-No. The Intro.Code can only be operated by entering a code.Do I need any other accessories for the Intro.Code in order to lock?-No. The Intro.Code is a complete lock and can be used immediately after installation.
€45.99*
CombiPad
Electronic combination lock Combipad, for lockers in shopping centres, educational institutions, public facilitiesThe Combipad electronic combination latch lock allows you to have different locking scenarios thanks to the various adjustable modes. Whether a PIN that is valid once or several times, the Combipad can be set according to your needs.Installation and operation
The Combipad can be installed in steel and wooden doors. The installation is done with the help of the enclosed screws and the mounting frame. The mounting hole is 91.2mm x 59.2mm. By means of a master code, the Combipad can be configured. Private mode, multi-user mdous, automatic locking, the LED display and the length of the PIN can be set. Further information and pictures can be found in the instructions in the download area.Product Features:
RTC mode: Programmable opening timesBolt mode: The lock closes automatically after 3 secondsLatch mode: The lock only locks after code entryPrivate mode: Entry of a fixed codeHotel mode: Enter a new code when the lock is openAdjustable code length: four- or six-digit codeStatus display: LED status display of locking statusFireproof stainless steel buttons with lasered numeralsZamak casing60,000 locking cycles with enclosed batterySignal and locking prevention when battery capacity is lowDetailed explanations can be found in the operating instructions. Use of accessoriesIf the included batteries run out, you can purchase additional suitable batteries under Accessories. Delivery content1x Electronic code lock
B-Smart-Lock Combipad 1x Zamak mounting frame 4x Screws 2x Lithium battery 3 V, CR123A1x Instruction manualFrequently asked questions
What is the RTC-Funktion?
-The Real-Time Clock function measures fixed opening and closing times. This means that the lock always opens and closes at the same time every day. In between, closings and openings are possible in the configured mode.
Variants from €85.10*
Flexo.Code
Flexo.CodeThe Flexo.Code stands out due to its diverse range of applications and installation options. The innovative design lock offers (the possibility of individual time control with adjustable locking duration and) up to 999,999 code variations. Like all locks in the Flexo series, the code variant allows for both recessed installation (Flush-Fit) and retrofitting (Retro-Fit). This means that an existing system can be easily and quickly converted or transformed into a modern, stylish design with the Flush-Fit option. The innovative design lock, Made in Germany, enables secure storage of personal belongings in offices, schools, and sports facilities.Installation and operationThe lock can be directly installed in our standardized mounting hole (Retro-Fit) of 16x19mm. Alternatively, a 45x47mm mounting hole can be chosen, allowing for recessed installation and enhancing the aesthetic appearance of the lock. For more details, please refer to the instructions in the download section above this product description or at the end of the page in our short product video. The lock is secured using an M19 nut and can optionally be complemented with anti-rotation protection (see appropriate accessories).To lock the lock, a user-defined PIN code is entered on the keypad. Subsequently, the lock releases the latch, and by rotating the rear-mounted bolt to the locking position at a 90° angle, the door is securely locked, preventing unauthorized access.
The lock can be used in both private and multi-user modes for various application scenarios. For more information, please refer to the download section above this description.Product featuresergonomic handling and high-quality designexternal battery access and battery replacement without dismantling the locking system(definable time control and adjustable locking duration)easy retrofitting, e.g., for replacing mechanical locker locksadjustable latch (in 90° increments)minimal front projection of only 15mm (in Flush-Fit)high-quality keypad with tactile feedbacklong battery life (30,000 locking cycles / approximately 3.5 years)compatibility with all BURG type B latchesImportant to note!The necessary batteries are not included as standard in the delivery! We recommend using original VARTA 1/2 AA batteries, as only with them can proper operation be guaranteed from our side! You can order the batteries directly from our shop.Scope of delivery1x Locking system1x Bolt mounting screw M6 x 12 mm1x Flush-Fit insert (only included in Flush-Fit-Package)1x M19 nut3x Type B latch
Variants from €84.49*
Digital mailbox Code.Box
Mailbox with electronic code lock Code.Box, for private and commercial useThe Code.Box with built-in Keypad Outdoor is the practical mailbox solution with our new robust electronic code lock for outdoor use. Installation and operationThe Code.Box can be securely mounted with the enclosed dowels and screws. The mounting holes should have a diameter of 5mm. The combination lock is already built into the mailbox and ready for immediate use.
As soon as the Code.Box is firmly mounted, it can be put into operation.Product featuresLED lock indicator IP54 protection (also for salt water) UV and corrosion protection Emergency opening by master code Locking mode Update capability Battery warning in case of critical condition Temperature range from 0°C to +60°CContent Delivery Overview1x mailbox incl. locking system 1x Lithium battery 3V, CR123A 1x instruction manual 4x dowels 4x screwsFrequently asked questionsDoes the Code.Box have to be installed under a roof?-No. The Code.Box withstands the weather and can also be installed without a roof.
€159.00*
Keypad Outdoor
Electronic code lock Keypad Outdoor (IP54), for outdoor lockers, mailboxes and safe-deposit boxes.The Keypad Outdoor can realise different installation situations indoors and outdoors and can be used in different ways thanks to the different modes.Installation and operation To mount the Keypad Outdoor, a mounting hole with a diameter of 23mm is required. The lock is fixed with only one screw and is immediately ready for use. Product Features
LED fastening indicator IP54 protection (also for salt water) UV and corrosion protection Simple installation with only one screw Up to 9,999 number combinations possible Private and multi-user modeEmergency opening via master code Locking mode Update capability Standard battery CR123A battery efficiency (45,000 cycles) Battery warning in case of critical battery level Compact dimensions (11mm surface / 24mm installation depth)Use of accessoriesIf the enclosed battery should lose its power, it can be reordered here in the shop.Delivery Content1x Electronic code lock
B-Smart-Lock Keypad Outdoor IP54 3x Screws 1x Lithium battery 3 V, CR123A 1x Instruction manualFrequently asked questionsHow long does the enclosed battery last?The enclosed battery lasts for approx. 45,000 closing cycles.
From
€54.27*
COREO Pro - Secondary stock
The COREO Pro is a combination lock with a rotary handle, which can be operated using a fixed code. It is suitable for installation in lockers, charging station, bicycle garages, doors, compartments, metal cabinets and many other wooden & metal furniture.The high-quality code lock is operated with a 9V battery, which can be changed from the outside. If the lock reaches a low battery level, the user is informed acoustically. *The lock may differ visually from the images. Delivery Content: 1x electronic combination lock 1x bolt 1x fastening nut 2x screws
€45.80*
CombiPad
Electronic combination lock Combipad, for lockers in shopping centres, educational institutions, public facilitiesThe Combipad electronic combination latch lock allows you to have different locking scenarios thanks to the various adjustable modes. Whether a PIN that is valid once or several times, the Combipad can be set according to your needs.Installation and operation
The Combipad can be installed in steel and wooden doors. The installation is done with the help of the enclosed screws and the mounting frame. The mounting hole is 91.2mm x 59.2mm. By means of a master code, the Combipad can be configured. Private mode, multi-user mdous, automatic locking, the LED display and the length of the PIN can be set. Further information and pictures can be found in the instructions in the download area.Product Features:
RTC mode: Programmable opening timesBolt mode: The lock closes automatically after 3 secondsLatch mode: The lock only locks after code entryPrivate mode: Entry of a fixed codeHotel mode: Enter a new code when the lock is openAdjustable code length: four- or six-digit codeStatus display: LED status display of locking statusFireproof stainless steel buttons with lasered numeralsZamak casing60,000 locking cycles with enclosed batterySignal and locking prevention when battery capacity is lowDetailed explanations can be found in the operating instructions. Use of accessoriesIf the included batteries run out, you can purchase additional suitable batteries under Accessories. Delivery content1x Electronic code lock
B-Smart-Lock Combipad 1x Zamak mounting frame 4x Screws 2x Lithium battery 3 V, CR123A1x Instruction manualFrequently asked questions
What is the RTC-Funktion?
-The Real-Time Clock function measures fixed opening and closing times. This means that the lock always opens and closes at the same time every day. In between, closings and openings are possible in the configured mode.
Variants from €85.10*
QLEO.Code
QLEO.code - electronic numeric code handle shell for metal cabinets
The QLEO.code is an innovative electronic metal locker lock that offers you the ultimate in security and flexibility. With its pin code function and a variety of intelligent features, it is the perfect solution for use in tool cabinets, lockers and metal cabinets.
Product features
Master and user code for flexible access control
Private mode and multi-user mode for individual or shared use
Battery operation with a service life of up to 30,000 locking cycles for long-lasting performance
Option to use push bars and deadbolts with 3-point locking for added security
Usage
The QLEO.code is a state-of-the-art electronic bolt lock that has been specially developed for use in metal cabinets. It replaces conventional locks and offers a secure and user-friendly locking solution. It is ideal for tool cabinets, metal cabinets and lockers in various environments such as workshops, storage rooms, offices and gyms.
Mounting and operation
How is the lock installed? Installing the QLEO.code is simple and straightforward. It can be mounted using the existing fixing points of your cabinet or locker without the need for additional drilling. The mounting holes of the locker handle are standardised and are compatible with those of BURG, Ronis and Euro-Locks. No tools are required to fit the lock, but you may need to fix the push bars in place.
Scope of delivery
1x QLEO.code handle lock
1x BURG bolt type B (501 G)
1x two-point bolt type B
1x fixing screw
Note: Batteries are not included!
Which batteries should be used?
The lock is approved for VARTA 1/2 AA H-R batteries of the VARTA brand. The use of other batteries may result in a reduced number of possible locking cycles. You can order additional batteries at the end of the product page.
€105.00*
%
TwinPad
Electronic code and RFID lock TwinPad for wooden furniture, lockers and doorsThe TwinPad electronic furniture lock offers you the option of using the lock both by entering a code and with an RFID transponder. The common reading methods MIFARE® Classic 1K and MIFARE® DESFire Evo are supported as RFID transponder media. Installation and operation
The unit can be mounted in the desired location using the enclosed screws. After the connection cable and batteries have been placed correctly, the lock can be used. It is possible to use the lock in multi-user mode (multi-user authorization) or to set it to private mode (permanently assigned authorization). In order to allow more users access via transponder, BURG offers compatible transponder chips and transponder cards.Product features
Dual mode: operation via code and RFID access ( MIFARE® Classic / MIFARE® DESFire EV II)Multi-user mode and private modeFlexible installation (DIN-right / DIN-left)Bolt-functionSlim front unit with metal frameAuto alarm after 4 failed opening attemptsEmergency power supply with mini-USB portAdjustment of signal volume using volume card (not included in delivery)Latch function - door can be locked by pressing itSuitable accessoriesThe TwinPad offers the possibility to register several transponders in private mode. That means that up to 27 transponders can interact with the lock simultaneously. BURG offers both a transponder card as well as a transponder chip. The transponders can be found below.Delivery Content1x operating unit 1x clamping unit with battery compartment 1x locking unit 1x Mini-USB cable for emergency power supply 1x reset needle (configuration needle) 2x screws: M4 x 29.5 3x wood screws: 3.4 x 20 1x screw: 3 x 8 (for the battery cover) Frequently asked questions:Does the TwinPad have a fingerprint function? - No. The TwinPad can only be opened using a code or transponder.Can I use any transponder for the TwinPad? - The frequency of the transponder is significant. BURG offers compatible transponders. If you use transponders from another manufacturer, we cannot guarantee flawless function.
€48.20*
€58.31*
(17.34% saved)