The hexagon nut, which is made of 100% brass, is ideally suited as a fixing element for cam locks, sash locks, combination locks and locker locks. The locking width of the fixing nut is 22x3.2.Compatible with:W-VRB-01 W-VRB-02 W-VRB-03 W-VRB-04 W-VRB-05 W-HEB-04 W-HEB-05 W-HEB-07 W-HEB-08 W-HEB-15 W-HEB-16 W-HEB-17 W-HEB-44 W-ZCS-02 W-ZCS-03 W-ZCS-06Delivery content overview:1x fixing nut M19

Locking angle SW3 Counterpart for cam locks, for locking lockers, compartments and cabinets. Suitable for use with lever, furniture, code and sash locks. The striking plate is made of steel and the surface is nickel-plated.The angle with which the bolt is held provides a surface of 11 mm. Further dimensions can be found in the picture gallery. How is it mounted? The striking plate is screwed to the wood at a 90 degree angle with 2 wood screws. The retaining bracket ensures a secure hold and is easy to fit. Scope of delivery1x Locking angle SW3 11mm

Locking angle SW1 The locking bracket is an optimal accessory for wooden furniture cam locks, screw-on locks and espagnolette locks. The material is steel and the surface is nickel-plated. How is it mounted?The striking plate is screwed to the wood with 2 wood screws at a 90 degree angle. The mounting bracket is easy to fit and ensures a secure hold for the transom.Scope of delivery:1x Locking angle SW1 8mm

Locking angle SW2  Counterpart for deadbolt locks, for locking lockers, compartments and cabinets. Suitable for use with lever, furniture, code and sash locks. The striking plate is made of steel and the surface is nickel-plated. The angle offers a surface of 12mm with which the bolt is held. Further dimensions can be found in the picture gallery.How is it mounted? The striking plate is screwed to the wood at a 90 degree angle with 2 wooden screws. The retaining bracket is easy to fit and ensures that the bolt is held securely. Scope of delivery: 1x locking angle SW2

The three-part Mounting set for consists of a disassembly key, an assembly aid and a release needle. The disassembly key is used to remove the locking cylinder. The assembly aid is used to change the locking direction (right/left). You can use the release needle to remove your knob.

You are looking for an exchangeable cylinder for your BURG furniture lock that fits your existing system, suitable for the current product series with exchangeable core cylinder, such as furniture cam locks, screw-on locks, espagnolette locks, push bar locks, glass wing door locks, sliding door locks, central locks, roller blind locks and knobs. Through the Repro ("Reproduction") option, new locking systems are handcrafted according to the desired locking. The new product can be used with the existing keys (X-profile). This makes it possible to renew or expand the system without having to issue new keys. Due to the manual production, the products of the RePro line have a slightly longer delivery time. With the help of the assembly set (not included in the scope of delivery), the cylinders of your BURG furniture lock can be removed, provided that they are not locked. The new cylinder core is inserted into the furniture lock and the assembly key is pulled out. Done! Each exchangeable cylinder is supplied as a set with two matching keys (X-profile). Additional keys can be ordered later. Each exchangeable cylinder is supplied with 2 keys. Additional spare keys (X-profile) can be ordered. Important: Repro articles are excluded from exchange, as they are manufactured individually for you. Compatible with the entire BURG furniture lock range. Overview of scope of delivery: 1x Exchangeable core according to desired lock number2x Steel key type X

Are you looking for a replacement cylinder for your BURG furniture lock? Have keys been stolen or do you simply want to fit your furniture lock with a new cylinder? No problem. Replace your existing cylinders with new differently locking exchange cylinders, suitable for all BURG products with exchange core cylinders, such as furniture cam locks, screw-on locks, espagnolette locks, push bar locks, glass wing door locks, sliding door locks, central locks, roller blind locks and knobs. With the help of the assembly set (not included in the scope of delivery), the cylinders of your BURG furniture lock can be removed, provided that they are not locked. The new cylinder core is inserted into the furniture lock, the installation key is pulled out. Done! Each exchange cylinder is supplied as a set with two matching keys (X-profile). Additional keys can be ordered later. Compatible with the entire BURG furniture lock range.Overview of scope of delivery: 1x Exchangeable core2x steel key type X

Push Rod The push rod is made of steel and has a nickel-plated surface. It is suitable for a variety of applications, such as our recessed handle locks or the Flexo Q.RFID and Flexo Q.Code systems. The rod is made from robust and durable materials to ensure maximum security and stability. The locking rod consists of a long, straight metal bar. By applying a pushing motion when the rod is installed, the cabinet or locker can be locked or unlocked! Which locks is the push rod compatible with? Flexo Q.RFID and Flexo Q.Code Recessed handles Scope of delivery: 1x Push Rod 1055 mm

Type-B bolt with rod acceptance for BURG handle, lever, bolt, and furniture locksWith this latch, various locks with the catch receptacle for the BURG Latch Type B can also be retrofitted to a two-point locking system using rods.InstallationThe latch, along with the tension spring, is placed onto the suitable catch receptacle on the lock and secured with a nut or screw. Now, the rods can be placed onto the rivet tips and secured against dislodging by turning the tension spring.Included in delivery1x Latch Type B1x Tension Spring

Original BURG® key blanks (20 pieces) of type X for individual cutting in, without cuts. The blanks (nickel-plated reversible keys) are suitable for duplicating (copying) existing keys. Precision key cutting machines are used to cut the corresponding lock. The packaging unit contains 20 key blanks.Overview of scope of delivery:20x Key blank type X

Rosette for furniture locks Custom-fit rosette for furniture locks (18mm diameter). Compatible with furniture locks. Provides a clean transition between the front and the lock cylinder. Compatible with:Screw-on locksEspagnolette locks Furniture lever locks Central lock connection Pegasus Central lock connection Hettich Central lock 40mm bolt Central lock 28mm bolt Scope of delivery at a glance: 1x rosette

This 18x22 mm furniture lock adapter allows the use of 16x19 mm furniture locks in existing 18x22 mm cutouts. Ideal for retrofitting, repairs, and series installation in carpentry, interior construction, contract furniture, and shopfitting – without any additional processing of the furniture parts. Features Flexible adaptation: Allows the use of 16x19 mm furniture locks in 18x22 mm drill holes – perfect for modifications, repairs, and existing furniture. Time-saving installation: No doweling or re-drilling required, as the existing 18x22 mm cutout can continue to be used. Durable material: Made of zamak for high dimensional stability, wear resistance, and long-lasting performance in daily use. Clean appearance: Ensures a centered, precise fit of the furniture lock and a professional look of the furniture front. Easy handling: The adapter is inserted into the cutout and the lock is installed as usual – ideal for workshops, installation teams, and maintenance services. Scope of delivery 1 x 18x22 mm furniture lock adapter for 16x19 mm furniture locks, material: zamak, individually packed in a bag FAQ Which furniture locks is the adapter suitable for? The adapter is designed for furniture locks with a housing size of 16x19 mm that are to be installed in furniture parts with an 18x22 mm cutout. In which materials can I use the adapter? The adapter is suitable for common furniture materials such as chipboard, MDF, engineered wood, and metal panels, provided an 18x22 mm cutout is available. Do I need special tools for installation? Usually not. The adapter is placed into the existing 18x22 mm drill hole, and the 16x19 mm furniture lock is then installed as usual. Depending on the material, slight pressure or a small wooden or rubber mallet may be helpful.

Locking angle SW5 Counterpart for cam locks, for locking lockers, compartments and cabinets. Suitable for use with lever, furniture, code and sash locks. The striking plate is made of steel and the surface is nickel-plated.The angle offers a surface of 9.5 mm with which the bolt is held. Further dimensions can be found in the picture gallery. How is it mounted? The striking plate is screwed to the wood with 2 wood screws at a 90 degree angle. The mounting bracket is easy to fit and ensures a secure hold for the transom. Scope of delivery:1x Locking angle SW5 9.5mm

Locking angle SW9 The locking bracket is an optimal accessory for wooden furniture cam locks, screw-on locks and espagnolette locks. The material is steel and the surface is nickel-plated. How is it mounted? The striking plate is screwed to the wood with 2 wood screws at a 90 degree angle. The mounting bracket is easy to fit and ensures a secure hold for the transom. Scope of delivery:1x Locking angle SW9  9.5mm

Furniture rotary knob TREND for BURG espagnolette, screw-on, glass swing door and furniture cam locks (cylinder rotary knob, rotary knob)The cylinder rotary knob is an accessory part for the BURG furniture lock program. It is possible to give the knob a locking function through a furniture lock core and at the same time improve the feel of the lock during use. The knob often gets its use in offices, schools and workshops.Installation and operation To install the knob, simply press it into the corresponding furniture lock. If a cylinder core is already installed in the furniture lock, it must first be pulled out of the installation set using an installation key. The knob can be removed from the assembly set at any time using the release needle. As soon as the knob is mounted and the furniture lock exchange cylinder is mounted in the knob, it can be operated. Product featuresDifferent installation situations can be mapped with the TREND cylinder knob, since keyed different, keyed alike or reproduced furniture lock change cores can be installed. In addition, the knob supports a maximum door or material thickness of 28mm, so that even solid wooden doors can be upgraded with a TREND knob, it is not relevant whether the door is hinged on the left or right. Accessories that can be usedFirstly, there are various furniture lock change cylinders, which are necessary for the full use of the knob. These are not included in the delivery, but can be ordered separately. Cylinder cores can be bought in keyed different, keyed alike or reproduced versions  for furniture locks, which then fit different installation situations. The assembly set is necessary for the insertion, removal and replacement of exchangeable cores. With the release needle, which is also included in the set, the knob can be easily removed from the furniture lock. All compatible accessories, as well as compatible locks, are linked below on this product page.Delivery Content1x TREND rotary knob Note: A cylinder core is required for full function. This can be ordered additionally. Frequently asked questions Which locks are compatible with the TREND knob? All screw-on locks, glass wing door locks, espagnolette locks and wooden lever locks from BURG are compatible with this rotary knob.

Turning barThe turning bar is made of steel and the surface is nickel-plated. They are suitable for a variety of applications, such as our espagnolette locks. The bar is made of robust and durable materials to ensure maximum security and stability. The turn bar consists of a long, straight rod made of metal and plastic. With a turning movement when the bar is installed, the cabinet or locker can be locked or unlocked!  Which locks is the espagnolette compatible with? Espagnolette lock W-DDS  Scope of delivery: 1x turn bar

Individual bolts for purchase. Compatible with the GST, GSC, GSP and GSD grip panels.Scope of delivery at a glance:1x bolt type G (div.)

The Rod Set (2-piece, 1007 mm) is a perforated, galvanised rod set for implementing a 2-point locking system in combination with a suitable rod receiver (item number: W-ZRI-01). It is ideal for lockers, cabinets and furniture where reliable locking at the top and bottom is to be implemented via a compatible lock. Features 2-point locking can be implemented – ensures the door is held securely by locking at two points (in combination with W-ZRI-01). 1007 mm length – suitable for many common cabinet and locker applications where continuous rod guidance is required. Perforated design – makes adjustment and installation easier, as the perforations support flexible positioning. Galvanised surface – provides increased corrosion protection and therefore a longer service life in daily use. High lock compatibility – can be used with all locks that have a BURG bolt receiver B. Versatile use – compatible with electronic RFID and code locks, cam locks, locker locks, combination locks and furniture locks (provided BURG bolt receiver B is present). What’s included 2x rods, 1007 mm, perforated, galvanised FAQ What is the rod set used for? The set is used to implement a 2-point locking system (top/bottom) on doors of lockers, cabinets or furniture – in combination with the W-ZRI-01 rod receiver. Which locks is the set compatible with? It is compatible with all locks that have a BURG bolt receiver B – including RFID and code locks as well as cam, locker, combination and furniture locks. Do I need additional accessories for installation? To implement the 2-point locking system, it is intended to be used in combination with the rod receiver (W-ZRI-01). Whether any additional mounting material is required depends on your door/cabinet design. Why is galvanising important? The galvanised surface protects the rods better against corrosion and is therefore particularly suitable for high-traffic applications. What does “perforated” mean in practice? The perforations support fixing the rods to the rod receiver for a secure hold.

Design Escutcheon RosetteThis design escutcheon rosette serves as a cover for push cylinders and push-turn cylinders, ensuring a seamless transition between furniture locks and doors. It fits all locks with a front diameter of 19mm and is particularly compatible with the Burg push cylinders DZ and DDZ.InstallationThe rosette is easily attached between the stator and the door.  Product Features 19mm internal diameter Material: Zamak Finish: Nickel-plated Elegant and high-quality craftsmanship Compatible with all push cylinders by Burg Package Includes1x Design Rosette

Design Escutcheon Plate for Furniture Locks Enhance your furniture piece with sophistication using our design escutcheon plate for furniture locks. This accessory is the perfect addition to elevate the look of your furniture. With refined aesthetics and meticulous craftsmanship, this escutcheon seamlessly complements various interior design styles, adding a timeless elegance to your furniture. Crafted from high-quality zinc die-casting, our design escutcheon plate showcases a masterpiece of artistry. Its gentle lines and subtle profile contribute to a delicate enhancement that draws attention to your furniture without being intrusive. This escutcheon is an ideal choice for enthusiasts of minimalist design and clean forms. Installing the design escutcheon plate is effortless and requires no special craftsmanship skills. Thanks to its precise fit, easy installation is guaranteed. The 18mm diameter furniture lock stator can be inserted through the escutcheon. Whether for cabinet doors, dressers, or other furniture pieces, this escutcheon adds a subtle yet impactful refinement to any element. The design escutcheon plate isn't just a visual highlight; it also signifies quality and durability. It offers not only aesthetic enhancement but also additional protection for the furniture lock. Elevate your furniture with this escutcheon that embodies perfection in the details. Transform your furniture into true works of design art with our design escutcheon plate for furniture locks. Add a touch of understated elegance and let your furniture piece shine. Order today and experience how small details can make a significant difference. Package Contents 1x Design Escutcheon Plate

Numbered Key Tags (Set 1–100) – precision laser engraved, chrome-plated Durable, high-quality key tags for clear locker identification – ideal for swimming pools, gyms, wellness centers, clubs, and businesses. Set: Numbers 1–100 | Ø 24 mm | Precision laser engraving | Chrome-plated surface Product Description This set includes 100 round key tags (numbered from 1 to 100), each with a matching key ring. The numbers are precision laser engraved – sharp, permanent, and wear-resistant. The chrome-plated surface gives each tag an elegant look and provides protection against corrosion and daily wear. Key Features Set with numbers 1–100 – complete sequential numbering Round tag, diameter: 24 mm Precision laser engraving: permanent, clear markings Chrome-plated, robust surface for long durability Includes matching key ring for easy attachment Perfect for lockers in swimming pools, gyms, clubs, schools, and businesses Why this product? Clear numbering reduces mix-ups and saves time for staff and users – especially in busy facilities. The high-quality engraving ensures the numbers remain visible even after frequent use. Usage Examples Swimming pools & leisure centers: quick locker identification Gyms & wellness areas: secure storage of personal belongings Clubs & schools: organized key management Hotels & companies: easy locker and compartment labeling Technical Details Material: Metal, chrome-plated Engraving method: Precision laser Diameter: 24 mm Scope of Delivery 100 × numbered tags (1–100) 100 × key rings

Design Step RosetteIntroduce a seamless blend of design and reliability with our exquisite Design Step Rosette for furniture locks, crafted from high-quality Zamak. This rosette not only adds a touch of elegance to your furniture locks but also provides a robust structure that ensures your privacy and security.Our Design Step Rosette has been meticulously crafted with an eye for detail, catering to the aesthetic demands of your office or dressing area. The curved surface and gentle lines bestow timeless sophistication upon your furniture piece, seamlessly integrating with a variety of interior styles.Crafted from durable Zamak, this rosette guarantees long-lasting performance and resilience against daily wear and tear. The nickel-plated finish not only adds an appealing shine but also safeguards against corrosion, extending the lifespan of your rosette.The easy installation of our Design Step Rosette requires just a few simple steps, infusing a touch of luxury into your home. This rosette is specifically designed for furniture locks that aspire to strike the perfect balance between style and functionality.Experience the best of both worlds – captivating design and dependable performance – with our Design Step Rosette for Zamak furniture locks. Elevate your furniture's elegance and class, making a statement of refinement within your spaces. Order today and transform your furniture locks into true functional works of art!Package Includes1x Design Step Rosette

Striker Plate AP1 for BURG glass wing door locksThe striker plate enables the use of a BURG glass wing door lock for a single-wing door.InstallationThe striker plate is placed on the glass door and secured with the additionally inserted lever cylinder lock W-HZM and the included nut. The installed rubber ring protects the material and prevents scratches on the glass.Compatible withW-HZM-01W-HZM-02Scope of delivery1x Striker Plate AP1

Our spring retainer plate for bolts is the compact solution for reliably fixing your push rods on a furniture lock. Featuring a single central screw hole, it mounts easily to the back of the lock housing and effectively prevents the rods from shifting or slipping out. The spring‑steel plate design maintains constant contact pressure without requiring any extra space. Thanks to its universal fit, it’s compatible with all BURG bolt locks that have a rear bolt installed—including handle escutcheons, lever locks, Flexo, Intro, and Niro—providing enhanced security and consistently precise locking performance for furniture, cabinets, and display cases.Scope of delivery1x spring retainer plate