Combination padlock Lever 575
Combination padlock Lever 575 with Master-Key function for locker locks and sash locksThe
padlock
Lever 575 is robust, user-friendly and designed for the special requirements of wood and metal lockers. Productfeatures:A 4-digit numerical code can be freely selected by the user and changed indefinitely. The lock combines the advantages of a combination padlock with the function of a central key (not included, available separately). This key can be used to open the lock and reset the code.Where can the lock be inserted?The padlock can be perfectly combined with lockers / sash locks.Please note the shackle thickness of the lock.We assure: The BURG padlock is compatible with all BURG lockers.Delivery contents:1x Combination padlock Lever 575
€15.23*
Anti-twisting device and mounting-bezel
Anti-twisting device and mounting bezel for lockers and wooden- furnitureThe security set consists of an anti-twisting device and a cover plate to prevent the lock from being forcibly unscrewed in lockers, cupboards and lockers made of wood with round installation holes.How to mount the security set?First, the anti-twisting device is pushed onto the threaded body of the lock and the lock is inserted into the hole. Now place the cover disc on the lock from behind. Then place the M19 nut on the threaded body and tighten it so that the teeth of the anti-twisting device press into the material and prevent the lock from rotating in the hole.Compatible with following products:Locker locks
W-VRB-01 W-VRB-02 W-VRB-03 W-VRB-04 W-VRB-05
Cam locks
W-HEB-04 W-HEB-05 W-HEB-07W-HEB-08 W-HEB-15 W-HEB-16 W-HEB-17 W-HEB-44Combination locks
W-ZCS-02 W-ZCS-03 W-ZCS-06
Delivery contents:1x Anti-twisting device1x Mounting-bezel
From
€3.99*
Brass-screwing nut M19 for cam locks, locker locks and combination locks
The hexagon nut, which is made of 100% brass, is ideally suited as a fixing element for cam locks, sash locks, combination locks and locker locks. The locking width of the fixing nut is 22x3.2.Compatible with:W-VRB-01 W-VRB-02 W-VRB-03 W-VRB-04 W-VRB-05 W-HEB-04 W-HEB-05 W-HEB-07 W-HEB-08 W-HEB-15 W-HEB-16 W-HEB-17 W-HEB-44 W-ZCS-02 W-ZCS-03 W-ZCS-06Delivery content overview:1x fixing nut M19
From
€1.00*
Angled locking plate 8mm
Angled locking plate 8mmCounterpart for cam locks, can be used for locking lockers, compartments and cabinets. Suitable for lever, furniture, code and locker locks. The locking plate is made of steel and the surface is nickel plated. The plate offers a surface of 8mm with which the bolt is held. Further dimensions can be found in the gallery.How is it mounted? The locking plate is fixed with 2 wood screws at the height of the locking bolt at a 90 degree angle in the inside of the wooden furniture.Delivery content1x locking plate WIN-FALLENS 8mmNote: This is a discontinued item and can no longer be ordered once stock has been used up.
From
€1.96*
Type-B bolt
Type-B bolt individually for BURG locks (locking tongue, locking plate) With the uniform BURG bolt-standard, all type-B bolts fit on every BURG lock with type-B bolt receiver. This means that even complex individual installation situations can be easily implemented.Delivery contents:1x type-B bolt (individual)
From
Variants from €1.78*
Type-B bolt (rod acceptance)
Type-B bolt with rod acceptance for BURG handle, lever, bolt, and furniture locksWith this latch, various locks with the catch receptacle for the BURG Latch Type B can also be retrofitted to a two-point locking system using rods.InstallationThe latch, along with the tension spring, is placed onto the suitable catch receptacle on the lock and secured with a nut or screw. Now, the rods can be placed onto the rivet tips and secured against dislodging by turning the tension spring.Included in delivery1x Latch Type B1x Tension Spring
From
€1.49*