Furniture locks
Robust, reliable, flexible in use - Our furniture locks offer the most popular solutions for locking letterboxes, cash registers, cassettes, lockers, workbenches, control cabinets, as well as furniture made of wood and metal.
Every lock also has the right key! Each reversible key is labelled with the corresponding lock and thus offers the possibility to reorder new keys at any time.
Our locks come in a wide variety of lengths and designs to provide the perfect solution for different locations. Whether with nut or clamp, each lock is always secure and ready for use.
Are you looking for screw-on locks, espagnolette locks, furniture lever locks, glass wing door locks, knobs or central locks? Then please click on one of the buttons below to call up the desired sub-category.
Brass-screwing nut M19 for cam locks, locker locks and combination locks
The hexagon nut, which is made of 100% brass, is ideally suited as a fixing element for cam locks, sash locks, combination locks and locker locks. The locking width of the fixing nut is 22x3.2.Compatible with:W-VRB-01 W-VRB-02 W-VRB-03 W-VRB-04 W-VRB-05 W-HEB-04 W-HEB-05 W-HEB-07 W-HEB-08 W-HEB-15 W-HEB-16 W-HEB-17 W-HEB-44 W-ZCS-02 W-ZCS-03 W-ZCS-06Delivery content overview:1x fixing nut M19
From
€1.00*
Locking angle SW1 8mm
Locking angle SW1
The locking bracket is an optimal accessory for wooden furniture cam locks, screw-on locks and espagnolette locks. The material is steel and the surface is nickel-plated.
How is it mounted?The striking plate is screwed to the wood with 2 wood screws at a 90 degree angle. The mounting bracket is easy to fit and ensures a secure hold for the transom.Scope of delivery:1x Locking angle SW1 8mm
From
€1.51*
Master key type X
Here you can order original master keys from BURG. The master key is made individually for you according to the lock number. The lock number has three digits. Original special blanks are used to manufacture the replacement keys. The lock number (key number) is stamped on your existing master key. IMPORTANT: A completed proof of legitimacy is required for the order, which you must upload under the item "Proof of legitimacy" for the order. You can find the proof of legitimacy as a PDF document in the Downloads section.The operator does not assume any warranty for incorrectly entered key numbers. Replacement keys are excluded from exchange.
€21.27*
Central locking Pegasus connection
With this central lock, you lock all the drawers in your container with just one lock.
The central locking cylinder is suitable for connection to Pegasus drawer systems.Overview of the scope of delivery:1x central lock connection Pegasus1x cylinder type X
1x chrome rosette
2x rail key type X
From
€6.84*
Angled locking plate 8mm
Angled locking plate 8mmCounterpart for cam locks, can be used for locking lockers, compartments and cabinets. Suitable for lever, furniture, code and locker locks. The locking plate is made of steel and the surface is nickel plated. The plate offers a surface of 8mm with which the bolt is held. Further dimensions can be found in the gallery.How is it mounted? The locking plate is fixed with 2 wood screws at the height of the locking bolt at a 90 degree angle in the inside of the wooden furniture.Delivery content1x locking plate WIN-FALLENS 8mmNote: This is a discontinued item and can no longer be ordered once stock has been used up.
From
€1.96*
Locking angle SW3 11mm
Locking angle SW3
Counterpart for cam locks, for locking lockers, compartments and cabinets. Suitable for use with lever, furniture, code and sash locks. The striking plate is made of steel and the surface is nickel-plated.The angle with which the bolt is held provides a surface of 11 mm. Further dimensions can be found in the picture gallery.
How is it mounted?
The striking plate is screwed to the wood at a 90 degree angle with 2 wood screws. The retaining bracket ensures a secure hold and is easy to fit.
Scope of delivery1x Locking angle SW3 11mm
From
€1.72*
Central locking Hettich connection
With this central lock, you lock all the drawers in your container with just one lock. The central locking cylinder is ONLY suitable for connecting to Hettich drawer systems.Overview of the scope of delivery:1x central locking Hettich connection1x cylinder type X1x chrome rosette2x rail key type X
From
€6.84*
Exchangeable cylinder for furniture locks (desired lock number)
You are looking for an exchangeable cylinder for your BURG furniture lock that fits your existing system, suitable for the current product series with exchangeable core cylinder, such as furniture cam locks, screw-on locks, espagnolette locks, push bar locks, glass wing door locks, sliding door locks, central locks, roller blind locks and knobs. Through the Repro ("Reproduction") option, new locking systems are handcrafted according to the desired locking. The new product can be used with the existing keys (X-profile). This makes it possible to renew or expand the system without having to issue new keys. Due to the manual production, the products of the RePro line have a slightly longer delivery time. With the help of the assembly set (not included in the scope of delivery), the cylinders of your BURG furniture lock can be removed, provided that they are not locked. The new cylinder core is inserted into the furniture lock and the assembly key is pulled out. Done! Each exchangeable cylinder is supplied as a set with two matching keys (X-profile). Additional keys can be ordered later. Each exchangeable cylinder is supplied with 2 keys. Additional spare keys (X-profile) can be ordered. Important: Repro articles are excluded from exchange, as they are manufactured individually for you. Compatible with the entire BURG furniture lock range.
Overview of scope of delivery:
1x Exchangeable core according to desired lock number2x Steel key type X
From
€13.57*
Mounting set
The three-part Mounting set for consists of a disassembly key, an assembly aid and a release needle. The disassembly key is used to remove the locking cylinder. The assembly aid is used to change the locking direction (right/left). You can use the release needle to remove your knob.
€11.05*
Locking angle SW2 12mm
Locking angle SW2
Counterpart for deadbolt locks, for locking lockers, compartments and cabinets. Suitable for use with lever, furniture, code and sash locks. The striking plate is made of steel and the surface is nickel-plated. The angle offers a surface of 12mm with which the bolt is held. Further dimensions can be found in the picture gallery.How is it mounted? The striking plate is screwed to the wood at a 90 degree angle with 2 wooden screws. The retaining bracket is easy to fit and ensures that the bolt is held securely.
Scope of delivery: 1x locking angle SW2
From
€1.51*
Central lock C4J with spread spring fastening
Central lock (C4J) with spread spring attachment, as an intelligent locking system for your desk container.
A central lock allows you to securely lock several drawers at the same time with just one lock. The zinc alloy (Zamak) of the lock ensures low wear and tear on the product as well as special hardness.
Overview of the scope of delivery:1x central lock1x bolt latch2x steel key type X
€11.73*
Screw-on lock left and right
The classic screw-on lock offers a practical and simple way to lock your single-leaf wardrobe.
This furniture box lock can be used in wooden doors with a thickness of 19mm.Delivery Content Overview:1x screw-on lock1x cylinder type X1x chrome rosette1x locking angle1x steel key type X1x foldable rail key type X
From
Variants from €11.19*
Cam lock for wooden furniture
This practical cam lock makes it easy to lock wooden doors of any kind. Wooden doors as well as drawers serve as the area of application here. The lock is fixed with standard wood screws.Overview of scope of delivery:
1 x Cam lock for wooden furniture1 x Exchangeable core
1 x Steel railway key
1 x Flextrack key
1 x Standard rosette
1 x Locking angle
From
€9.39*
Espagnolette lock including 2 espagnolettes
The classic espagnolette lock offers a practical and simple way to lock your wardrobe.
You can also lock double-leaf wardrobes by locking on the bolts in the wardrobe top and the wardrobe bottom.
This cabinet lock can be used in wooden doors with a thickness of 19mm.Overview of the scope of delivery:1x espagnolette lock1x furniture lock cylinder core1x rosette1x
angled
locking plate2x locking bolt on plate2x locking bolt2x profile bars2x covering caps1x locking hook left1x locking hook right2x locking hook guide
From
Variants from €20.56*
Locking angle SW5 9.5mm
Locking angle SW5
Counterpart for cam locks, for locking lockers, compartments and cabinets. Suitable for use with lever, furniture, code and sash locks. The striking plate is made of steel and the surface is nickel-plated.The angle offers a surface of 9.5 mm with which the bolt is held. Further dimensions can be found in the picture gallery.
How is it mounted?
The striking plate is screwed to the wood with 2 wood screws at a 90 degree angle. The mounting bracket is easy to fit and ensures a secure hold for the transom.
Scope of delivery:1x Locking angle SW5 9.5mm
From
€1.51*
Espagnolette lock including 2 espagnolettes
The classic espagnolette lock offers a practical and simple way to lock your wardrobe.
You can also lock double-leaf wardrobes by locking on the bolts in the wardrobe top and the wardrobe bottom.
This cabinet lock can be used in wooden doors with a thickness of 19mm.Overview of the scope of delivery:1x espagnolette lock1x furniture lock cylinder core1x rosette1x
angled
locking plate2x locking bolt on plate2x locking bolt2x profile bars2x covering caps1x locking hook left1x locking hook right2x locking hook guide
From
Variants from €20.56*
Espagnolette lock including 2 espagnolettes
The classic espagnolette lock offers a practical and simple way to lock your wardrobe.
You can also lock double-leaf wardrobes by locking on the bolts in the wardrobe top and the wardrobe bottom.
This cabinet lock can be used in wooden doors with a thickness of 19mm.Overview of the scope of delivery:1x espagnolette lock1x furniture lock cylinder core1x rosette1x
angled
locking plate2x locking bolt on plate2x locking bolt2x profile bars2x covering caps1x locking hook left1x locking hook right2x locking hook guide
From
Variants from €20.56*
Key blank type X (PU 20 pcs)
Original BURG® key blanks (20 pieces) of type X for individual cutting in, without cuts. The blanks (nickel-plated reversible keys) are suitable for duplicating (copying) existing keys. Precision key cutting machines are used to cut the corresponding lock. The packaging unit contains 20 key blanks.Overview of scope of delivery:20x Key blank type X
€19.23*
Espagnolette lock including 2 espagnolettes
The classic espagnolette lock offers a practical and simple way to lock your wardrobe.
You can also lock double-leaf wardrobes by locking on the bolts in the wardrobe top and the wardrobe bottom.
This cabinet lock can be used in wooden doors with a thickness of 19mm.Overview of the scope of delivery:1x espagnolette lock1x furniture lock cylinder core1x rosette1x
angled
locking plate2x locking bolt on plate2x locking bolt2x profile bars2x covering caps1x locking hook left1x locking hook right2x locking hook guide
From
Variants from €20.56*
Keysy screw-on lock DIN-right/left 25mm
Remaining stock - Only while stocks last!Delivery Content:1x Lock
2x Key
1x Strike plate
1x Rosette
€6.00*
Central locking 40mm bolt
With this central lock, you lock all the drawers in your container with just one lock.
The central locking cylinder is suitable for connection to various drawer systems.Overview of scope of delivery:1x central locking 40mm1x cylinder type X1x Chrome rossette1x steel key type X1x railway key type X
From
€6.84*
Type-B bolt (rod acceptance)
Type-B bolt with rod acceptance for BURG handle, lever, bolt, and furniture locksWith this latch, various locks with the catch receptacle for the BURG Latch Type B can also be retrofitted to a two-point locking system using rods.InstallationThe latch, along with the tension spring, is placed onto the suitable catch receptacle on the lock and secured with a nut or screw. Now, the rods can be placed onto the rivet tips and secured against dislodging by turning the tension spring.Included in delivery1x Latch Type B1x Tension Spring
From
€1.49*
Exchangeable cylinder for furniture locks
Are you looking for a replacement cylinder for your BURG furniture lock? Have keys been stolen or do you simply want to fit your furniture lock with a new cylinder? No problem. Replace your existing cylinders with new differently locking exchange cylinders, suitable for all BURG products with exchange core cylinders, such as furniture cam locks, screw-on locks, espagnolette locks, push bar locks, glass wing door locks, sliding door locks, central locks, roller blind locks and knobs. With the help of the assembly set (not included in the scope of delivery), the cylinders of your BURG furniture lock can be removed, provided that they are not locked. The new cylinder core is inserted into the furniture lock, the installation key is pulled out. Done! Each exchange cylinder is supplied as a set with two matching keys (X-profile). Additional keys can be ordered later. Compatible with the entire BURG furniture lock range.Overview of scope of delivery:
1x Exchangeable core2x steel key type X
From
Variants from €10.96*
Hauptschlüssel Typ E
Hier können Sie Original-Hauptschlüssel von BURG bestellen. Der Hauptschlüssel wird gemäß der Schließungsnummer individuell für Sie angefertigt. Die Schließungsnummer ist fünfstellig. Zur Fertigung der Ersatzschlüssel werden Original-Sonderrohlinge verwendet. Die Schließungsnummer (Schlüsselnummer) ist auf Ihrem vorhandenen Hauptschlüssel eingeprägt.Sollte dies nicht der Fall sein, melden Sie sich gerne via Mail. WICHTIG: Für die Bestellung wird ein ausgefüllter Legitimationsnachweis benötigt, den Sie unter dem Punkt "Legitimationsnachweis" für die Bestellung hochladen müssen. Den Legitimationsnachweis finden Sie als PDF-Dokument im Bereich Downloads auf dieser Seite.Für falsch eingegebene Schlüsselnummern übernimmt der Betreiber keine Gewährleistung. Ersatzschlüssel sind vom Umtausch ausgeschlossen.
€19.34*