Flexo.RFID
For volume discounts as a B2B customer, log in/register here.
Product number:
W-FRR-01
Product advantages
- Occupancy detection
- flexible installation options
- compatible with all BURG Type B bolts.
Electronic RFID Lock Flexo.RFID for Wood and Steel Furniture
The Flexo.RFID (Radio Frequency Identification) sets a new standard. It has been developed for the leading RFID standards (MIFARE® Classic 1K and MIFARE® DESFire EV). With its three authorization levels (Master, Manager, and User), the locking system offers high flexibility in operation. Like all locks in the Flexo series, the RFID variant allows both recessed installation (Flush-Fit) and retrofitting (Retro-Fit). This allows an existing system to be conveniently and quickly upgraded or transformed into a modern stylish design with Flush-Fit. The innovative design lock - Made in Germany - enables the secure storage of personal items in offices, schools, and sports facilities.
Installation and Operation
The lock can be directly installed in our standardized mounting hole (Retro-Fit) 16x19mm. Alternatively, a 45x47mm mounting hole can be chosen, allowing the lock to be recessed and visually enhanced (Flush-Fit).
Installation Video Flush-Fit
More information can be found in the manual in the download section below this product description. The lock is secured with an M19 nut and can optionally be supplemented with anti-rotation protection (see suitable accessories). By presenting a transponder card or transponder chip, the lock is released. It is then opened or closed by a 90° turning motion. In doing so, the bolt mounted on the back moves to a locking angle, preventing the door from opening. If a user card is lost, the lock can be opened at any time with the Master or Manager card.
Product Features
- External battery access and battery replacement without dismantling the locking system
- RFID Standard: MIFARE® Classic 1K/ MIFARE® DESFire EV
- Integrated occupancy detection with MIFARE® Classic 1K
- Easy retrofitting, e.g., to replace mechanical locker locks
- Adjustable bolt (in 90° increments)
- Minimal front build-up of only 15 mm (in Flush-Fit)
- Up to 10 user cards can be programmed in private mode
- Long battery life (25,000 locking cycles / approx. 3 years)
- Compatibility with all BURG Type B bolts
Important to Note!
To use all functions of the lock, at least 3 cards are required, and the mode change can only be set via the separately available mode change card. For sample orders, we recommend ordering the starter set. The necessary batteries are not included as standard! We recommend using original VARTA 1/2 AA batteries, as this ensures proper operation from our side! You can order the batteries directly from our shop.
Scope of Delivery
- 1x Locking system
- 1x Transponder card
- 1x Bolt fixing screw M6 x 12 mm
- 1x Mounting insert (only in Flush-Fit)
- 1x M19 nut
- 3x Type B bolts
What Batteries Should Be Used?
Using high-quality brand batteries is absolutely essential for the flawless functioning of the lock. The locking systems are factory-approved for the specified industrial batteries of the VARTA brand. The use of other batteries may result in a reduced number of possible locking cycles. In addition, limited functionality and/or functional problems are likely. Experience shows that other batteries, even with the same specifications, have different performance characteristics. Therefore, BURG does not guarantee the (functionality) of the lock when using batteries other than those mentioned above.
technical specifications "Flexo.RFID"
| Battery: | 2x CR1/2 AA H-R |
|---|---|
| Battery life (locking cycles): | approx. 25.000 |
| Bolt-type: | B |
| Frequency: | 13,56 MHz |
| Head-Diameter: | 50mm |
| Lock fastening: | M19-screw-nut |
| Locking angle: | 90° |
| Master-Key function: | yes |
| Material: | Messing, Plastic, Zamak (zinc-die casting) |
| Material thickness: | 22mm |
| Modes: | Multiuser-mode with occupation display, Private-mode, Private mode with automated fastener |
| Mounting hole (mm): | 16 x 19, 45 x 47 |
| RFID-Standard: | MIFARE® Classic 1K |
Downloads "Flexo.RFID"
Compatible accessories
RFID Transponder chip 13.56 MHz black
RFID transponder chip MIFARE Classic 1K 13.56 MHz black The black transponder card can be used as a convenient key replacement for our RFID locks in wooden furniture. It communicates on the 13.56 MHz standard MIFARE Classic 1K and is almost unnoticeable on the key ring due to its compact size. Which locks is this transponder chip compatible with? Intro.RFID W-EIR-01 Master Pro W-EMS-02 TwinPad W-TWP-01 Delivery Content:1x transponder chip black
From
€4.31*
Anti-twisting device and mounting-bezel
Anti-twisting device and mounting bezel for lockers and wooden- furnitureThe security set consists of an anti-twisting device and a cover plate to prevent the lock from being forcibly unscrewed in lockers, cupboards and lockers made of wood with round installation holes.How to mount the security set?First, the anti-twisting device is pushed onto the threaded body of the lock and the lock is inserted into the hole. Now place the cover disc on the lock from behind. Then place the M19 nut on the threaded body and tighten it so that the teeth of the anti-twisting device press into the material and prevent the lock from rotating in the hole.Compatible with following products:Locker locks
W-VRB-01 W-VRB-02 W-VRB-03 W-VRB-04 W-VRB-05
Cam locks
W-HEB-04 W-HEB-05 W-HEB-07W-HEB-08 W-HEB-15 W-HEB-16 W-HEB-17 W-HEB-44Combination locks
W-ZCS-02 W-ZCS-03 W-ZCS-06
Delivery contents:1x Anti-twisting device1x Mounting-bezel
From
€3.99*
Mode change card Intro / Flexo
Transponder mode change card for Intro.RFID and Flexo.RFID locks This function card is an RFID card, for switching between multi-user and private mode. OperationHold the card out briefly. To ensure proper functioning, avoid pressing too hard.Scope of delivery1x mode change card
€34.99*
Flexo.RFID reset card
Reset Card Flexo.RFIDThe reset card allows you to reset the Flexo.RFID to factory settings, for example, to retrain incorrectly trained or lost master cards.Scope of Delivery1x Reset Card for Flexo.RFID
€39.27*
Brass-screwing nut M19 for cam locks, locker locks and combination locks
The hexagon nut, which is made of 100% brass, is ideally suited as a fixing element for cam locks, sash locks, combination locks and locker locks. The locking width of the fixing nut is 22x3.2.Compatible with:W-VRB-01 W-VRB-02 W-VRB-03 W-VRB-04 W-VRB-05 W-HEB-04 W-HEB-05 W-HEB-07 W-HEB-08 W-HEB-15 W-HEB-16 W-HEB-17 W-HEB-44 W-ZCS-02 W-ZCS-03 W-ZCS-06Delivery content overview:1x fixing nut M19
€2.67*
RFID Transponder card
RFID transponder card MIFARE® Classic 1K 13.56 MHz redThe red transponder card can be used as a convenient key replacement for our RFID locks in wooden furniture. It communicates on the 13.56 MHz MIFARE® Classic 1K standard. The lock can be opened and closed simply by holding it in front of the lock.Which locks is this transponder card compatible with?Intro.RFID W-EIR-01Flexo.RFID W-FRR-01Master Pro W-EMS-02TwinPad W-TWP-01 Scope of delivery1x transponder card red
€7.92*
Transponder enabling box Mifare (13.56 Mhz)
Transponder Release Box Mifare Classic (13.56 MHz)The transponder release box allows for the manual removal of an occupancy detection on a Mifare medium such as cards, wristbands, or chips. It is commonly used in sports facilities, offices, and fitness studios, where staff at the counter remove the occupancy detection from the media of visitors who have accidentally locked their compartment after leaving the changing room. The box features a high-quality plastic housing, is wireless, and operates with two CR123A batteries. With its compact dimensions of only 61 x 61mm, it fits elegantly into any counter landscape and is an ideal complement to BURG's electronic transponder locking systems.
Advantages
Easy deletion of occupancy detections
Transponders are reusable after release
Immediately usable without programming
Suitable for Flexo.RFID, Master Pro, Corona II, Corona I FW V3.0 Deletes only block 0 of the respective sector: time recording /
check-in and occupancy detection
Note: If the information to be deleted is located in a sector other than 0, a specific sector card is required to correctly configure the release box.
Scope of Delivery
Transponder release boxNote: Batteries are not included. One CR123A battery is required.
€190.40*
Compatible bolts
Type-B bolt (rod acceptance)
Type-B bolt with rod acceptance for BURG handle, lever, bolt, and furniture locksWith this latch, various locks with the catch receptacle for the BURG Latch Type B can also be retrofitted to a two-point locking system using rods.InstallationThe latch, along with the tension spring, is placed onto the suitable catch receptacle on the lock and secured with a nut or screw. Now, the rods can be placed onto the rivet tips and secured against dislodging by turning the tension spring.Included in delivery1x Latch Type B1x Tension Spring
From
€1.49*
Matching locking angles
Angled locking plate 8mm
Angled locking plate 8mmCounterpart for cam locks, can be used for locking lockers, compartments and cabinets. Suitable for lever, furniture, code and locker locks. The locking plate is made of steel and the surface is nickel plated. The plate offers a surface of 8mm with which the bolt is held. Further dimensions can be found in the gallery.How is it mounted? The locking plate is fixed with 2 wood screws at the height of the locking bolt at a 90 degree angle in the inside of the wooden furniture.Delivery content1x locking plate WIN-FALLENS 8mmNote: This is a discontinued item and can no longer be ordered once stock has been used up.
From
€1.96*
Locking angle SW1 8mm
Locking angle SW1
The locking bracket is an optimal accessory for wooden furniture cam locks, screw-on locks and espagnolette locks. The material is steel and the surface is nickel-plated.
How is it mounted?The striking plate is screwed to the wood with 2 wood screws at a 90 degree angle. The mounting bracket is easy to fit and ensures a secure hold for the transom.Scope of delivery:1x Locking angle SW1 8mm
From
€1.51*
Locking angle SW2 12mm
Locking angle SW2
Counterpart for deadbolt locks, for locking lockers, compartments and cabinets. Suitable for use with lever, furniture, code and sash locks. The striking plate is made of steel and the surface is nickel-plated. The angle offers a surface of 12mm with which the bolt is held. Further dimensions can be found in the picture gallery.How is it mounted? The striking plate is screwed to the wood at a 90 degree angle with 2 wooden screws. The retaining bracket is easy to fit and ensures that the bolt is held securely.
Scope of delivery: 1x locking angle SW2
From
€1.51*
Locking angle SW3 11mm
Locking angle SW3
Counterpart for cam locks, for locking lockers, compartments and cabinets. Suitable for use with lever, furniture, code and sash locks. The striking plate is made of steel and the surface is nickel-plated.The angle with which the bolt is held provides a surface of 11 mm. Further dimensions can be found in the picture gallery.
How is it mounted?
The striking plate is screwed to the wood at a 90 degree angle with 2 wood screws. The retaining bracket ensures a secure hold and is easy to fit.
Scope of delivery1x Locking angle SW3 11mm
From
€1.72*
Locking angle SW5 9.5mm
Locking angle SW5
Counterpart for cam locks, for locking lockers, compartments and cabinets. Suitable for use with lever, furniture, code and sash locks. The striking plate is made of steel and the surface is nickel-plated.The angle offers a surface of 9.5 mm with which the bolt is held. Further dimensions can be found in the picture gallery.
How is it mounted?
The striking plate is screwed to the wood with 2 wood screws at a 90 degree angle. The mounting bracket is easy to fit and ensures a secure hold for the transom.
Scope of delivery:1x Locking angle SW5 9.5mm
From
€1.51*
Locking angle SW9 9.5mm
Locking angle SW9
The locking bracket is an optimal accessory for wooden furniture cam locks, screw-on locks and espagnolette locks. The material is steel and the surface is nickel-plated.
How is it mounted?
The striking plate is screwed to the wood with 2 wood screws at a 90 degree angle. The mounting bracket is easy to fit and ensures a secure hold for the transom.
Scope of delivery:1x Locking angle SW9 9.5mm
From
€1.51*
Suitable battery
VARTA 1/2 AA H-R battery set
VARTA 1/2 AABattery Set
To ensure the proper operation of our locks, we use the high-quality batteries from VARTA for our Flexo Lock Series.
Content: 2 Pieces (€3.43* / 1 Pieces)
From
€6.86*
Compatible RFID media
RFID Transponder chip 13.56 MHz black
RFID transponder chip MIFARE Classic 1K 13.56 MHz black The black transponder card can be used as a convenient key replacement for our RFID locks in wooden furniture. It communicates on the 13.56 MHz standard MIFARE Classic 1K and is almost unnoticeable on the key ring due to its compact size. Which locks is this transponder chip compatible with? Intro.RFID W-EIR-01 Master Pro W-EMS-02 TwinPad W-TWP-01 Delivery Content:1x transponder chip black
From
€4.31*
RFID Transponder card
RFID transponder card MIFARE® Classic 1K 13.56 MHz redThe red transponder card can be used as a convenient key replacement for our RFID locks in wooden furniture. It communicates on the 13.56 MHz MIFARE® Classic 1K standard. The lock can be opened and closed simply by holding it in front of the lock.Which locks is this transponder card compatible with?Intro.RFID W-EIR-01Flexo.RFID W-FRR-01Master Pro W-EMS-02TwinPad W-TWP-01 Scope of delivery1x transponder card red
€7.92*
Mifare Classic Smartlabel
RFID transponder labels Our RFID transponder labels offer a powerful solution for identifying and tracking objects. These compact labels are equipped with RFID technology that makes it possible to capture information wirelessly and precisely. Simply stick them on the desired objects and benefit from the advantages: -Contactless identification: our RFID transponder labels do not require physical contact to exchange information. Simply hold them in front of the reader and the data is captured. - Efficient data capture: With RFID technology, you can capture information in seconds. Ideal for inventory management, access control and more. - Versatile application possibilities: Our labels are customisable and can be used for various applications including logistics, asset tracking, library management and product security - Durable and reliable: RFID transponder labels are robust and can withstand the rigours of everyday use. They offer a reliable identification solution that lasts a long time. - Easy integration Our labels are compatible with a wide range of RFID readers and systems. Integration into your existing infrastructure is straightforward. Experience the benefits of modern identification technology with our RFID transponder labels. Order today and optimise your processes. Scope of delivery: 1x Mifare Classic Smartlabel
From
€2.63*
Mifare Classic Smartlabel
RFID transponder labels Our RFID transponder labels offer a powerful solution for identifying and tracking objects. These compact labels are equipped with RFID technology that makes it possible to capture information wirelessly and precisely. Simply stick them on the desired objects and benefit from the advantages: -Contactless identification: our RFID transponder labels do not require physical contact to exchange information. Simply hold them in front of the reader and the data is captured. - Efficient data capture: With RFID technology, you can capture information in seconds. Ideal for inventory management, access control and more. - Versatile application possibilities: Our labels are customisable and can be used for various applications including logistics, asset tracking, library management and product security - Durable and reliable: RFID transponder labels are robust and can withstand the rigours of everyday use. They offer a reliable identification solution that lasts a long time. - Easy integration Our labels are compatible with a wide range of RFID readers and systems. Integration into your existing infrastructure is straightforward. Experience the benefits of modern identification technology with our RFID transponder labels. Order today and optimise your processes. Scope of delivery: 1x Mifare Classic Smartlabel
From
€2.63*