Solutions for shopfitting

Electronic code lock Combipad, for lockers in shopping centres, educational institutions and public facilitiesThe Combipad electronic latch lock with numeric code offers you different locking scenarios thanks to the various adjustable modes. Whether a one-time or multiple-use PIN, the Combipad can be configured to suit your needs.Installation and operationThe Combipad can be installed in steel and wooden doors. Installation is carried out using the supplied screws and mounting frame. The cut-out size is 91,2mm x 59,2mm. Using a master code, the Combipad can be configured. Private mode, multi-user mode, automatic locking, the LED indicator and the PIN length can be set. Further information and images can be found in the manual in the download area.Product featuresRTC mode: programmable opening times Bolt mode: the lock closes automatically after 3 seconds Latch mode: the lock only locks after code entry Private mode: entry of a fixed code Hotel mode: entry of a new code when open Adjustable code length: four- or six-digit code Status indication: LED status display of the locking state Fire-resistant stainless-steel buttons with laser-engraved digitsHousing made of zamak60.000 locking cycles with the included batterySignal and prevention of locking when battery capacity is lowDetailed explanations can be found in the user manual.Use of accessoriesIf the supplied batteries run low, you can purchase additional suitable batteries here under Accessories. Scope of delivery1x Electronic code lock B-Smart-Lock Combipad 1x mounting frame made of zamak 4x screws 2x lithium battery 3 V, CR123A* 1x user manual 1x strike plate 1-66 SLB-002 Frequently asked questionsWhat is the RTC function?The Real-Time Clock function defines fixed opening and closing times. This means the lock opens and closes at the same time every day. In between, closings and openings are possible in the configured mode. Where can I find the manual? CombiPad operating manual Which batteries should be used? Using high-quality branded batteries is absolutely essential for the fault-free operation of the lock. The locking systems are factory-approved for the specified industrial batteries from the brand VARTA. The use of other batteries may lead to a reduced number of possible locking cycles. In addition, limited functionality and/or operational issues are likely. Experience shows that other batteries, even with the same specifications, exhibit different performance. Therefore, BURG assumes no guarantee for the (functionality) of the lock when using batteries other than those mentioned above.

Electronic code and RFID lock TwinPad for wooden furniture, lockers and doorsThe TwinPad electronic furniture lock offers you the option of using the lock both by entering a code and with an RFID transponder. The common reading methods MIFARE® Classic 1K and MIFARE® DESFire Evo are supported as RFID transponder media. Installation and operation The unit can be mounted in the desired location using the enclosed screws. After the connection cable and batteries have been placed correctly, the lock can be used. It is possible to use the lock in multi-user mode (multi-user authorization) or to set it to private mode (permanently assigned authorization). In order to allow more users access via transponder, BURG offers compatible transponder chips and transponder cards.Product features Dual mode: operation via code and RFID access ( MIFARE® Classic 1K/ MIFARE® DESFire EV )Multi-user mode and private modeFlexible installation (DIN-right / DIN-left)Bolt-functionSlim front unit with metal frameAuto alarm after 4 failed opening attemptsEmergency power supply with mini-USB portAdjustment of signal volume using volume card (not included in delivery)Latch function - door can be locked by pressing itSuitable accessoriesThe TwinPad offers the possibility to register several transponders in private mode. That means that up to 27 transponders can interact with the lock simultaneously. BURG offers both a transponder card as well as a transponder chip. The transponders can be found below.Delivery Content1x operating unit 1x clamping unit with battery compartment 1x locking unit 1x USB-C cable for emergency power supply 1x reset needle (configuration needle) 2x screws: M4 x 29.5 3x wood screws: 3.4 x 20 1x screw: 3 x 8 (for the battery cover) Frequently asked questions:Does the TwinPad have a fingerprint function? - No. The TwinPad can only be opened using a code or transponder.Can I use any transponder for the TwinPad? - The frequency of the transponder is significant. BURG offers compatible transponders. If you use transponders from another manufacturer, we cannot guarantee flawless function.  Which batteries should be used? -The use of high-quality brand batteries is absolutely essential for the lock to function correctly. The locking systems are approved ex works for the specified VARTA brand industrial batteries. The use of other batteries can lead to a reduced number of possible locking cycles. In addition, limited functionality and/or functional problems are likely. Experience shows that other batteries, even with the same specifications, have different performance characteristics. Therefore, BURG does not guarantee the (functionality) of the lock when using batteries other than those specified above.

Intro.CodeThe Intro.Code represents the entry into comfortable electronic locking for cabinets and lockers. Each Intro can be installed in both wooden and steel furniture. It can be conveniently used in both wooden and steel furniture. With its easy operation, the lock simplifies daily life and shines with its high-quality design and ergonomic handling. Thanks to its easy retrofitting capability through the standard mounting hole (Retro-Fit) and the flexibly adjustable latch, the lock effortlessly adapts to any installation situation.Installation and operationThe lock is inserted into a 16mm x 19mm mounting hole. The maximum door thickness is 18mm. The lock is fixed to the door with the enclosed nut. The enclosed bolt can then be mounted and aligned. The master code can be used to select private mode or multi-user mode. In both modes, the lock is opened by entering a PIN. Product featuresergonomic handling external battery change easy retrofitting bolt adjustable in 45° steps emergency power supply via micro USB port multiuser mode Private mode Emergency opening via master code LED signals in certain scenariosContent Delivery Overview1x Intro.code 1x bolt1x battery tray 1x M19 nutFrequently asked questionsDoes the Intro.Code also have an RFID function?-No. The Intro.Code can only be operated by entering a code.Do I need any other accessories for the Intro.Code in order to lock?-No. The Intro.Code is a complete lock and can be used immediately after installation.Which batteries should be used? -The use of high-quality brand batteries is absolutely essential for the lock to function correctly. The locking systems are approved ex works for the specified VARTA brand industrial batteries. The use of other batteries can lead to a reduced number of possible locking cycles. In addition, limited functionality and/or functional problems are likely. Experience shows that other batteries, even with the same specifications, have different performance characteristics. Therefore, BURG does not guarantee the (functionality) of the lock when using batteries other than those specified above.

Intro.CodeThe Intro.Code represents the entry into comfortable electronic locking for cabinets and lockers. Each Intro can be installed in both wooden and steel furniture. It can be conveniently used in both wooden and steel furniture. With its easy operation, the lock simplifies daily life and shines with its high-quality design and ergonomic handling. Thanks to its easy retrofitting capability through the standard mounting hole (Retro-Fit) and the flexibly adjustable latch, the lock effortlessly adapts to any installation situation.Installation and operationThe lock is inserted into a 16mm x 19mm mounting hole. The maximum door thickness is 18mm. The lock is fixed to the door with the enclosed nut. The enclosed bolt can then be mounted and aligned. The master code can be used to select private mode or multi-user mode. In both modes, the lock is opened by entering a PIN. Product featuresergonomic handling external battery change easy retrofitting bolt adjustable in 45° steps emergency power supply via micro USB port multiuser mode Private mode Emergency opening via master code LED signals in certain scenariosContent Delivery Overview1x Intro.code 1x bolt1x battery tray 1x M19 nutFrequently asked questionsDoes the Intro.Code also have an RFID function?-No. The Intro.Code can only be operated by entering a code.Do I need any other accessories for the Intro.Code in order to lock?-No. The Intro.Code is a complete lock and can be used immediately after installation.Which batteries should be used? -The use of high-quality brand batteries is absolutely essential for the lock to function correctly. The locking systems are approved ex works for the specified VARTA brand industrial batteries. The use of other batteries can lead to a reduced number of possible locking cycles. In addition, limited functionality and/or functional problems are likely. Experience shows that other batteries, even with the same specifications, have different performance characteristics. Therefore, BURG does not guarantee the (functionality) of the lock when using batteries other than those specified above.

Electronic code lock Combipad, for lockers in shopping centres, educational institutions and public facilitiesThe Combipad electronic latch lock with numeric code offers you different locking scenarios thanks to the various adjustable modes. Whether a one-time or multiple-use PIN, the Combipad can be configured to suit your needs.Installation and operationThe Combipad can be installed in steel and wooden doors. Installation is carried out using the supplied screws and mounting frame. The cut-out size is 91,2mm x 59,2mm. Using a master code, the Combipad can be configured. Private mode, multi-user mode, automatic locking, the LED indicator and the PIN length can be set. Further information and images can be found in the manual in the download area.Product featuresRTC mode: programmable opening times Bolt mode: the lock closes automatically after 3 seconds Latch mode: the lock only locks after code entry Private mode: entry of a fixed code Hotel mode: entry of a new code when open Adjustable code length: four- or six-digit code Status indication: LED status display of the locking state Fire-resistant stainless-steel buttons with laser-engraved digitsHousing made of zamak60.000 locking cycles with the included batterySignal and prevention of locking when battery capacity is lowDetailed explanations can be found in the user manual.Use of accessoriesIf the supplied batteries run low, you can purchase additional suitable batteries here under Accessories. Scope of delivery1x Electronic code lock B-Smart-Lock Combipad 1x mounting frame made of zamak 4x screws 2x lithium battery 3 V, CR123A* 1x user manual 1x strike plate 1-66 SLB-002 Frequently asked questionsWhat is the RTC function?The Real-Time Clock function defines fixed opening and closing times. This means the lock opens and closes at the same time every day. In between, closings and openings are possible in the configured mode. Where can I find the manual? CombiPad operating manual Which batteries should be used? Using high-quality branded batteries is absolutely essential for the fault-free operation of the lock. The locking systems are factory-approved for the specified industrial batteries from the brand VARTA. The use of other batteries may lead to a reduced number of possible locking cycles. In addition, limited functionality and/or operational issues are likely. Experience shows that other batteries, even with the same specifications, exhibit different performance. Therefore, BURG assumes no guarantee for the (functionality) of the lock when using batteries other than those mentioned above.

Electronic code and RFID lock TwinPad for wooden furniture, lockers and doorsThe TwinPad electronic furniture lock offers you the option of using the lock both by entering a code and with an RFID transponder. The common reading methods MIFARE® Classic 1K and MIFARE® DESFire Evo are supported as RFID transponder media. Installation and operation The unit can be mounted in the desired location using the enclosed screws. After the connection cable and batteries have been placed correctly, the lock can be used. It is possible to use the lock in multi-user mode (multi-user authorization) or to set it to private mode (permanently assigned authorization). In order to allow more users access via transponder, BURG offers compatible transponder chips and transponder cards.Product features Dual mode: operation via code and RFID access ( MIFARE® Classic 1K/ MIFARE® DESFire EV )Multi-user mode and private modeFlexible installation (DIN-right / DIN-left)Bolt-functionSlim front unit with metal frameAuto alarm after 4 failed opening attemptsEmergency power supply with mini-USB portAdjustment of signal volume using volume card (not included in delivery)Latch function - door can be locked by pressing itSuitable accessoriesThe TwinPad offers the possibility to register several transponders in private mode. That means that up to 27 transponders can interact with the lock simultaneously. BURG offers both a transponder card as well as a transponder chip. The transponders can be found below.Delivery Content1x operating unit 1x clamping unit with battery compartment 1x locking unit 1x USB-C cable for emergency power supply 1x reset needle (configuration needle) 2x screws: M4 x 29.5 3x wood screws: 3.4 x 20 1x screw: 3 x 8 (for the battery cover) Frequently asked questions:Does the TwinPad have a fingerprint function? - No. The TwinPad can only be opened using a code or transponder.Can I use any transponder for the TwinPad? - The frequency of the transponder is significant. BURG offers compatible transponders. If you use transponders from another manufacturer, we cannot guarantee flawless function.  Which batteries should be used? -The use of high-quality brand batteries is absolutely essential for the lock to function correctly. The locking systems are approved ex works for the specified VARTA brand industrial batteries. The use of other batteries can lead to a reduced number of possible locking cycles. In addition, limited functionality and/or functional problems are likely. Experience shows that other batteries, even with the same specifications, have different performance characteristics. Therefore, BURG does not guarantee the (functionality) of the lock when using batteries other than those specified above.