Recessed handle GSP for steel and double-door cabinets and lockers (shell, recessed or flush handle lock) The rectangular recessed handle with a practical black grip is designed for securing metal lockers with single or double doors. It is therefore ideal for use in workshops, offices, schools, universities, department stores, changing rooms, and many other facilities. Installation and operation The recessed handle is installed without tools using several clips located on the sides at the back of the lock. You can find a short instructional video at the bottom of this page. By turning the handle, the lock secures the door front with a bolt. Turning the key supplied in the locking cylinder then blocks the handle, securing the lock. Unlocking the cylinder releases the handle again, allowing a 90° turn to open the door front. Product features A 3-point locking system can be implemented. If a key is lost, replacement keys can be easily reproduced. Furthermore, multiple individually keyed handles can be opened with a master key. Lock cylinders can also be replaced or reproduced without purchasing a completely new lock (see below “compatible replacement cylinders”). Thanks to the standardized mounting cut-out of 72 x 72 mm, the handle can be exchanged with any other recessed handles from the BURG range. Compatible accessories To accommodate complex installation situations, various type B bolts can be mounted on the rear side of the lock. Scope of delivery 1 x Recessed handle GSP 1 x Cylinder core (installed) 1 x Bolt with offset: 10 mm / Backset: 70 mm 1 x Bolt with offset: 0 mm / Backset: 59 mm 1 x Bolt with offset: 6.5 mm / Backset: 70 mm 1 x Two-point bolt 2 x Steel keys type X

Type-B bolt individually for BURG locks  (locking tongue, locking plate) With the uniform BURG bolt-standard, all type-B bolts fit on every BURG lock with type-B bolt receiver. This means that even complex individual installation situations can be easily implemented.Delivery contents:1x type-B bolt (individual)

You have the BURG handle lock (old series: GSB, GSD, GSF, GSG) in use and would like several locking cylinders to be able to be locked with one key. No problem! With the interchangeable cylinders (W-WKG) for BURG handle locks of the GSP, GSC and GST series, you can turn your keyed different cabinet system into a keyed alike one. You order several keyed alike exchangeable cylinders.(NOT suitable for GSB, GSD, GSF and GSG handles).With the help of the mounting set (not included) you can remove the exchangeable cylinders of your current handle locks, provided that they are not locked. The new keyed alike cylinder core is inserted, the assembly key is pulled out. Done! Each exchangeable cylinder is delivered as a set with two matching keys (X-profile reversible key). Additional keys can be ordered later. This spare part allows you to lock any number of steel furniture with handle locksuniformly. Caution: The older models of the handle lock (GSD, GSB and GSF) use a different cylinder, see product number W-WKF.Content delivery overview:1x handle locks exchangeable cylinder2x type-X steel key

The three-part Mounting set for consists of a disassembly key, an assembly aid and a release needle. The disassembly key is used to remove the locking cylinder. The assembly aid is used to change the locking direction (right/left). You can use the release needle to remove your knob.

Are you looking for an exchangeable cylinder for your BURG handle lock that fits your existing system? No problem! With the repro exchangeable cylinder (W-WGR-01) for BURG handle locks of the GSP, GSC and GST series, you can have an exchangeable cylinder manufactured according to your locking system. Through the Repro ("Reproduction") option, new locking systems are handcrafted according to the desired locking. The new product can be used with the existing keys (X-profile). This makes it possible to renew or expand the system without having to issue new keys. Due to the manual production, the products of the RePro line have a slightly longer delivery time. With the help of the installation set (not included in the delivery content), the cylinders of your BURG lock can be removed, provided that they are not locked. The new cylinder core is inserted into the lock, the assembly key is pulled out. Done! Each exchange cylinder is supplied as a set with two matching keys (X-profile). Additional keys can be ordered later. Important: Repro articles are excluded from exchange, as they are manufactured individually for you. Handle lock exchangeable cylinders (repro) do NOT fit the GSD handle lock, as it has a built-in cylinder.Content delivery overview:1x exchangeable cylinder for handle locks for desired locking number2x type-X steel key

Type-B bolt with rod acceptance for BURG handle, lever, bolt, and furniture locksWith this latch, various locks with the catch receptacle for the BURG Latch Type B can also be retrofitted to a two-point locking system using rods.InstallationThe latch, along with the tension spring, is placed onto the suitable catch receptacle on the lock and secured with a nut or screw. Now, the rods can be placed onto the rivet tips and secured against dislodging by turning the tension spring.Included in delivery1x Latch Type B1x Tension Spring

770 ALUTITAN Cylinder Padlock by BURG-WÄCHTER Short Description The 770 ALUTITAN is a particularly lightweight yet robust cylinder padlock with a solid aluminum body. It provides reliable protection against break-ins and corrosion, making it ideal for daily use – whether on the go or stationary. Product Features Solid, rustproof aluminum body – lightweight and durable Hardened steel shackle with double locking mechanism from 30 mm height Weather-resistant internal mechanism – perfect for outdoor use Available with high shackle or protected shackle for extra security Also available as a keyed-alike set with two padlocks and four keys Application Areas The 770 ALUTITAN is ideal for securing backpacks, bicycles, toolboxes, cellar compartments, and cabinets – suitable for both private and commercial use. Especially in schools and educational institutions, the lock provides a practical and secure solution for lockers when combined with our matching locker latches. Its lightweight design and robust construction make it perfect for everyday use by students or staff. Scope of Delivery 1× 770 ALUTITAN padlock 2× keys

This 18x22 mm furniture lock adapter allows the use of 16x19 mm furniture locks in existing 18x22 mm cutouts. Ideal for retrofitting, repairs, and series installation in carpentry, interior construction, contract furniture, and shopfitting – without any additional processing of the furniture parts. Features Flexible adaptation: Allows the use of 16x19 mm furniture locks in 18x22 mm drill holes – perfect for modifications, repairs, and existing furniture. Time-saving installation: No doweling or re-drilling required, as the existing 18x22 mm cutout can continue to be used. Durable material: Made of zamak for high dimensional stability, wear resistance, and long-lasting performance in daily use. Clean appearance: Ensures a centered, precise fit of the furniture lock and a professional look of the furniture front. Easy handling: The adapter is inserted into the cutout and the lock is installed as usual – ideal for workshops, installation teams, and maintenance services. Scope of delivery 1 x 18x22 mm furniture lock adapter for 16x19 mm furniture locks, material: zamak, individually packed in a bag FAQ Which furniture locks is the adapter suitable for? The adapter is designed for furniture locks with a housing size of 16x19 mm that are to be installed in furniture parts with an 18x22 mm cutout. In which materials can I use the adapter? The adapter is suitable for common furniture materials such as chipboard, MDF, engineered wood, and metal panels, provided an 18x22 mm cutout is available. Do I need special tools for installation? Usually not. The adapter is placed into the existing 18x22 mm drill hole, and the 16x19 mm furniture lock is then installed as usual. Depending on the material, slight pressure or a small wooden or rubber mallet may be helpful.

Additional key suitable for the keyed alike exchangeable cores (W-WKG- ...) for handle locks. The exchangeable cylinders (W-WKG-...) for BURG handle locks of the GSP, GSC and GST series allow you to turn your keyed different cabinet system into a keyed alike one. Here you can order additional keys. ATTENTION: This key fits ONLY with the keyed alike exchange cylinders ordered in the webshop.Additional keys are excluded from exchange.Content delivery overview:1x type-X steel key

Magno Padlock – Versatile, Robust and Reliable The Magno padlock stands out for its versatility and durability. Its hardened and chrome-plated brass body, combined with a solid shackle, ensures high tear resistance. The rustproof internal components allow for long-term use, even in rough weather conditions. For maximum convenience, the Magno padlock is also available in a keyed-alike version – ideal when using multiple locks with just one key. Features Available in 7 sizes (15 mm to 60 mm body width) Hardened and chrome-plated brass body Double locking mechanism from 30 mm for increased security Rustproof internal components ensure long-lasting performance High tear resistance due to sturdy construction Available in many different keyings Optional keyed-alike version – one key for multiple locks Technical Data (Size: 40 mm) External width: 40.00 mm External height: 64.50 mm External depth: 14.30 mm Shackle height (inner): 23.50 mm Shackle width (inner): 22.00 mm Shackle thickness: 6.50 mm Weight: 0.165 kg Inner mechanism: rustproof Main material: brass, chrome-plated Seawater-resistant: No Scope of Delivery 1x Magno padlock (Size: 40 mm) 2x Keys (varies by model)