Recessed handle GSP for steel and double-door cabinets and lockers (shell, recessed or flush handle lock) The rectangular recessed handle with a practical black grip is designed for securing metal lockers with single or double doors. It is therefore ideal for use in workshops, offices, schools, universities, department stores, changing rooms, and many other facilities. Installation and operation The recessed handle is installed without tools using several clips located on the sides at the back of the lock. You can find a short instructional video at the bottom of this page. By turning the handle, the lock secures the door front with a bolt. Turning the key supplied in the locking cylinder then blocks the handle, securing the lock. Unlocking the cylinder releases the handle again, allowing a 90° turn to open the door front. Product features A 3-point locking system can be implemented. If a key is lost, replacement keys can be easily reproduced. Furthermore, multiple individually keyed handles can be opened with a master key. Lock cylinders can also be replaced or reproduced without purchasing a completely new lock (see below “compatible replacement cylinders”). Thanks to the standardized mounting cut-out of 72 x 72 mm, the handle can be exchanged with any other recessed handles from the BURG range. Compatible accessories To accommodate complex installation situations, various type B bolts can be mounted on the rear side of the lock. Scope of delivery 1 x Recessed handle GSP 1 x Cylinder core (installed) 1 x Bolt with offset: 10 mm / Backset: 70 mm 1 x Bolt with offset: 0 mm / Backset: 59 mm 1 x Bolt with offset: 6.5 mm / Backset: 70 mm 1 x Two-point bolt 2 x Steel keys type X

Type-B bolt individually for BURG locks  (locking tongue, locking plate) With the uniform BURG bolt-standard, all type-B bolts fit on every BURG lock with type-B bolt receiver. This means that even complex individual installation situations can be easily implemented.Delivery contents:1x type-B bolt (individual)

You have the BURG handle lock (old series: GSB, GSD, GSF, GSG) in use and would like several locking cylinders to be able to be locked with one key. No problem! With the interchangeable cylinders (W-WKG) for BURG handle locks of the GSP, GSC and GST series, you can turn your keyed different cabinet system into a keyed alike one. You order several keyed alike exchangeable cylinders.(NOT suitable for GSB, GSD, GSF and GSG handles).With the help of the mounting set (not included) you can remove the exchangeable cylinders of your current handle locks, provided that they are not locked. The new keyed alike cylinder core is inserted, the assembly key is pulled out. Done! Each exchangeable cylinder is delivered as a set with two matching keys (X-profile reversible key). Additional keys can be ordered later. This spare part allows you to lock any number of steel furniture with handle locksuniformly. Caution: The older models of the handle lock (GSD, GSB and GSF) use a different cylinder, see product number W-WKF.Content delivery overview:1x handle locks exchangeable cylinder2x type-X steel key

The three-part Mounting set for consists of a disassembly key, an assembly aid and a release needle. The disassembly key is used to remove the locking cylinder. The assembly aid is used to change the locking direction (right/left). You can use the release needle to remove your knob.

Are you looking for an exchangeable cylinder for your BURG handle lock that fits your existing system? No problem! With the repro exchangeable cylinder (W-WGR-01) for BURG handle locks of the GSP, GSC and GST series, you can have an exchangeable cylinder manufactured according to your locking system. Through the Repro ("Reproduction") option, new locking systems are handcrafted according to the desired locking. The new product can be used with the existing keys (X-profile). This makes it possible to renew or expand the system without having to issue new keys. Due to the manual production, the products of the RePro line have a slightly longer delivery time. With the help of the installation set (not included in the delivery content), the cylinders of your BURG lock can be removed, provided that they are not locked. The new cylinder core is inserted into the lock, the assembly key is pulled out. Done! Each exchange cylinder is supplied as a set with two matching keys (X-profile). Additional keys can be ordered later. Important: Repro articles are excluded from exchange, as they are manufactured individually for you. Handle lock exchangeable cylinders (repro) do NOT fit the GSD handle lock, as it has a built-in cylinder.Content delivery overview:1x exchangeable cylinder for handle locks for desired locking number2x type-X steel key

Type-B bolt with rod acceptance for BURG handle, lever, bolt, and furniture locksWith this latch, various locks with the catch receptacle for the BURG Latch Type B can also be retrofitted to a two-point locking system using rods.InstallationThe latch, along with the tension spring, is placed onto the suitable catch receptacle on the lock and secured with a nut or screw. Now, the rods can be placed onto the rivet tips and secured against dislodging by turning the tension spring.Included in delivery1x Latch Type B1x Tension Spring

Additional key suitable for the keyed alike exchangeable cores (W-WKG- ...) for handle locks. The exchangeable cylinders (W-WKG-...) for BURG handle locks of the GSP, GSC and GST series allow you to turn your keyed different cabinet system into a keyed alike one. Here you can order additional keys. ATTENTION: This key fits ONLY with the keyed alike exchange cylinders ordered in the webshop.Additional keys are excluded from exchange.Content delivery overview:1x type-X steel key

Individual bolts for purchase. Compatible with the GST, GSC, GSP and GSD grip panels.Scope of delivery at a glance:1x bolt type G (div.)

The locking system is designed for use in storage cabinets in industrial halls or offices. Its understated design gives it a sustainable look. Turning the key on the front face 90 degrees to the left or right unlocks the system and releases the handle for operation. Pulling the handle retracts the linkage and the bolt. After operation, the handle automatically returns to its original position so that it does not protrude. When the door is pushed shut again, the linkage and bolt fall back into the locked position, so that the lock automatically locks the door.AdvantagesVery flat designPractical latch function3-point lockingScope of delivery at a glance:1x recessed lever handle2x steel keys, type X